lkml.org 
[lkml]   [2020]   [Oct]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/2] extcon: fsa9480: Rewrite bindings in YAML and extend
Date
This rewrites the FSA9480 DT bindings using YAML and
extends them with the compatible TI TSU6111.

I chose to name the file fcs,fsa880 since this is the
first switch, later versions are improvements.

Cc: devicetree@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
.../bindings/extcon/extcon-fsa9480.txt | 21 --------
.../bindings/extcon/fcs,fsa880.yaml | 52 +++++++++++++++++++
2 files changed, 52 insertions(+), 21 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/extcon/extcon-fsa9480.txt
create mode 100644 Documentation/devicetree/bindings/extcon/fcs,fsa880.yaml

diff --git a/Documentation/devicetree/bindings/extcon/extcon-fsa9480.txt b/Documentation/devicetree/bindings/extcon/extcon-fsa9480.txt
deleted file mode 100644
index 624bd76f468e..000000000000
--- a/Documentation/devicetree/bindings/extcon/extcon-fsa9480.txt
+++ /dev/null
@@ -1,21 +0,0 @@
-FAIRCHILD SEMICONDUCTOR FSA9480 MICROUSB SWITCH
-
-The FSA9480 is a USB port accessory detector and switch. The FSA9480 is fully
-controlled using I2C and enables USB data, stereo and mono audio, video,
-microphone, and UART data to use a common connector port.
-
-Required properties:
- - compatible : Must be one of
- "fcs,fsa9480"
- "fcs,fsa880"
- - reg : Specifies i2c slave address. Must be 0x25.
- - interrupts : Should contain one entry specifying interrupt signal of
- interrupt parent to which interrupt pin of the chip is connected.
-
- Example:
- musb@25 {
- compatible = "fcs,fsa9480";
- reg = <0x25>;
- interrupt-parent = <&gph2>;
- interrupts = <7 0>;
- };
diff --git a/Documentation/devicetree/bindings/extcon/fcs,fsa880.yaml b/Documentation/devicetree/bindings/extcon/fcs,fsa880.yaml
new file mode 100644
index 000000000000..ef6a246a1337
--- /dev/null
+++ b/Documentation/devicetree/bindings/extcon/fcs,fsa880.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/extcon/fcs,fsa880.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Fairchild Semiconductor FSA880, FSA9480 and compatibles
+
+maintainers:
+ - Linus Walleij <linus.walleij@linaro.org>
+
+description:
+ The FSA880 and FSA9480 are USB port accessory detectors and switches.
+ The switch is fully controlled using I2C and enables USB data, stereo
+ and mono audio, video, microphone, and UART data to use a common
+ connector port. Compatible switches exist from other manufacturers.
+
+properties:
+ compatible:
+ enum:
+ - fcs,fsa880
+ - fcs,fsa9480
+ - ti,tsu6111
+
+ reg:
+ maxItems: 1
+ description: The I2C address for an FSA880 compatible device is
+ usually 0x25.
+
+ interrupts:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ usb-switch@25 {
+ compatible = "fcs,fsa880";
+ reg = <0x25>;
+ interrupt-parent = <&gpio>;
+ interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+ };
+ };
--
2.26.2
\
 
 \ /
  Last update: 2020-11-01 01:44    [W:0.051 / U:0.180 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site