lkml.org 
[lkml]   [2020]   [Oct]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] gpiolib: acpi: Support GpioInt with active_low polarity
Date
On the current implementation we only support active_high polarity for
GpioInt.

There can be cases where a GPIO has active_low polarity and it is also a
IRQ source.

De-couple the irq_polarity and active_low fields instead of re-use it.

With this patch we support ACPI devices such as:

Name (_CRS, ResourceTemplate () // _CRS: Current Resource Settings
{
GpioInt (Edge, ActiveBoth, Exclusive, PullDefault, 0x0000,
"\\_SB.PCI0.GPIO", 0x00, ResourceConsumer, ,
)
{ // Pin list
0x0064
}
})
Name (_DSD, Package (0x02) // _DSD: Device-Specific Data
{
ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301") /* Device Properties for _DSD */,
Package (0x01)
{
Package (0x02)
{
"privacy-gpio",
Package (0x04)
{
\_SB.PCI0.XHCI.RHUB.HS07,
Zero,
Zero,
One
}
}
}
})

Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
---
drivers/gpio/gpiolib-acpi.c | 8 ++++----
drivers/gpio/gpiolib-acpi.h | 6 ++++--
2 files changed, 8 insertions(+), 6 deletions(-)

diff --git a/drivers/gpio/gpiolib-acpi.c b/drivers/gpio/gpiolib-acpi.c
index 834a12f3219e..bc33c1056391 100644
--- a/drivers/gpio/gpiolib-acpi.c
+++ b/drivers/gpio/gpiolib-acpi.c
@@ -624,7 +624,7 @@ int acpi_gpio_update_gpiod_lookup_flags(unsigned long *lookupflags,
break;
}

- if (info->polarity == GPIO_ACTIVE_LOW)
+ if (info->active_low)
*lookupflags |= GPIO_ACTIVE_LOW;

return 0;
@@ -665,6 +665,7 @@ static int acpi_populate_gpio_lookup(struct acpi_resource *ares, void *data)
agpio->pin_table[pin_index]);
lookup->info.pin_config = agpio->pin_config;
lookup->info.gpioint = gpioint;
+ lookup->info.active_low = !!lookup->active_low;

/*
* Polarity and triggering are only specified for GpioInt
@@ -675,11 +676,10 @@ static int acpi_populate_gpio_lookup(struct acpi_resource *ares, void *data)
*/
if (lookup->info.gpioint) {
lookup->info.flags = GPIOD_IN;
- lookup->info.polarity = agpio->polarity;
+ lookup->info.irq_polarity = agpio->polarity;
lookup->info.triggering = agpio->triggering;
} else {
lookup->info.flags = acpi_gpio_to_gpiod_flags(agpio);
- lookup->info.polarity = lookup->active_low;
}
}

@@ -958,7 +958,7 @@ int acpi_dev_gpio_irq_get(struct acpi_device *adev, int index)
return ret;

irq_flags = acpi_dev_get_irq_type(info.triggering,
- info.polarity);
+ info.irq_polarity);

/* Set type if specified and different than the current one */
if (irq_flags != IRQ_TYPE_NONE &&
diff --git a/drivers/gpio/gpiolib-acpi.h b/drivers/gpio/gpiolib-acpi.h
index 1c6d65cf0629..816a2d7a21ed 100644
--- a/drivers/gpio/gpiolib-acpi.h
+++ b/drivers/gpio/gpiolib-acpi.h
@@ -16,7 +16,8 @@ struct acpi_device;
* @flags: GPIO initialization flags
* @gpioint: if %true this GPIO is of type GpioInt otherwise type is GpioIo
* @pin_config: pin bias as provided by ACPI
- * @polarity: interrupt polarity as provided by ACPI
+ * @irq_polarity: interrupt polarity as provided by ACPI
+ * @active_low: pin polarity as provided by ACPI
* @triggering: triggering type as provided by ACPI
* @quirks: Linux specific quirks as provided by struct acpi_gpio_mapping
*/
@@ -25,7 +26,8 @@ struct acpi_gpio_info {
enum gpiod_flags flags;
bool gpioint;
int pin_config;
- int polarity;
+ int irq_polarity;
+ bool active_low;
int triggering;
unsigned int quirks;
};
--
2.29.0.rc2.309.g374f81d7ae-goog
\
 
 \ /
  Last update: 2020-10-28 23:44    [W:0.342 / U:0.064 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site