lkml.org 
[lkml]   [2020]   [Oct]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 06/12] ARM: dts: exynos: adjust node names to DT spec in Exynos5250 boards
Date
The Devicetree specification expects device node names to have a generic
name, representing the class of a device. Also the convention for node
names is to use hyphens, not underscores.

No functional changes.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
arch/arm/boot/dts/exynos5250-arndale.dts | 6 +++---
arch/arm/boot/dts/exynos5250-smdk5250.dts | 4 ++--
arch/arm/boot/dts/exynos5250-snow-common.dtsi | 4 ++--
arch/arm/boot/dts/exynos5250-snow-rev5.dts | 2 +-
arch/arm/boot/dts/exynos5250-snow.dts | 2 +-
arch/arm/boot/dts/exynos5250-spring.dts | 2 +-
6 files changed, 10 insertions(+), 10 deletions(-)

diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
index 79546f11af26..a161f6237c7f 100644
--- a/arch/arm/boot/dts/exynos5250-arndale.dts
+++ b/arch/arm/boot/dts/exynos5250-arndale.dts
@@ -27,7 +27,7 @@ chosen {
stdout-path = "serial2:115200n8";
};

- gpio_keys {
+ gpio-keys {
compatible = "gpio-keys";

menu {
@@ -211,7 +211,7 @@ &i2c_0 {
samsung,i2c-max-bus-freq = <20000>;
samsung,i2c-slave-addr = <0x66>;

- s5m8767_pmic@66 {
+ pmic@66 {
compatible = "samsung,s5m8767-pmic";
reg = <0x66>;
interrupt-parent = <&gpx3>;
@@ -511,7 +511,7 @@ buck9_reg: BUCK9 {
&i2c_3 {
status = "okay";

- wm1811: codec@1a {
+ wm1811: audio-codec@1a {
compatible = "wlf,wm1811";
reg = <0x1a>;
clocks = <&i2s0 CLK_I2S_CDCLK>;
diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts
index 186790f39e4d..8b5a79a8720c 100644
--- a/arch/arm/boot/dts/exynos5250-smdk5250.dts
+++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts
@@ -290,7 +290,7 @@ eeprom@51 {
reg = <0x51>;
};

- wm8994: wm8994@1a {
+ wm8994: audio-codec@1a {
compatible = "wlf,wm8994";
reg = <0x1a>;

@@ -385,7 +385,7 @@ &spi_1 {
status = "okay";
cs-gpios = <&gpa2 5 GPIO_ACTIVE_HIGH>;

- w25q80bw@0 {
+ flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "w25x80";
diff --git a/arch/arm/boot/dts/exynos5250-snow-common.dtsi b/arch/arm/boot/dts/exynos5250-snow-common.dtsi
index c952a615148e..6635f6184051 100644
--- a/arch/arm/boot/dts/exynos5250-snow-common.dtsi
+++ b/arch/arm/boot/dts/exynos5250-snow-common.dtsi
@@ -217,7 +217,7 @@ panel_in: endpoint {
};
};

- mmc3_pwrseq: mmc3_pwrseq {
+ mmc3_pwrseq: mmc3-pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&gpx0 2 GPIO_ACTIVE_LOW>, /* WIFI_RSTn */
<&gpx0 1 GPIO_ACTIVE_LOW>; /* WIFI_EN */
@@ -289,7 +289,7 @@ &i2c_0 {
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <378000>;

- max77686: max77686@9 {
+ max77686: pmic@9 {
compatible = "maxim,max77686";
interrupt-parent = <&gpx3>;
interrupts = <2 IRQ_TYPE_NONE>;
diff --git a/arch/arm/boot/dts/exynos5250-snow-rev5.dts b/arch/arm/boot/dts/exynos5250-snow-rev5.dts
index 7cbfc6f1f4b8..0822b778c035 100644
--- a/arch/arm/boot/dts/exynos5250-snow-rev5.dts
+++ b/arch/arm/boot/dts/exynos5250-snow-rev5.dts
@@ -32,7 +32,7 @@ codec {
};

&i2c_7 {
- max98090: codec@10 {
+ max98090: audio-codec@10 {
compatible = "maxim,max98090";
reg = <0x10>;
interrupts = <4 IRQ_TYPE_NONE>;
diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts
index 75fdc5e6d423..9946dce54d74 100644
--- a/arch/arm/boot/dts/exynos5250-snow.dts
+++ b/arch/arm/boot/dts/exynos5250-snow.dts
@@ -30,7 +30,7 @@ codec {
};

&i2c_7 {
- max98095: codec@11 {
+ max98095: audio-codec@11 {
compatible = "maxim,max98095";
reg = <0x11>;
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/exynos5250-spring.dts b/arch/arm/boot/dts/exynos5250-spring.dts
index a92ade33779c..9d2baea62d0d 100644
--- a/arch/arm/boot/dts/exynos5250-spring.dts
+++ b/arch/arm/boot/dts/exynos5250-spring.dts
@@ -105,7 +105,7 @@ &i2c_0 {
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <378000>;

- s5m8767-pmic@66 {
+ pmic@66 {
compatible = "samsung,s5m8767-pmic";
reg = <0x66>;
interrupt-parent = <&gpx3>;
--
2.25.1
\
 
 \ /
  Last update: 2020-10-27 18:11    [W:0.200 / U:2.044 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site