lkml.org 
[lkml]   [2020]   [Oct]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 04/12] ARM: dts: exynos: adjust node names to DT spec in Exynos4412 boards
Date
The Devicetree specification expects device node names to have a generic
name, representing the class of a device. Also the convention for node
names is to use hyphens, not underscores.

No functional changes.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi | 8 ++++----
arch/arm/boot/dts/exynos4412-itop-elite.dts | 2 +-
.../boot/dts/exynos4412-itop-scp-core.dtsi | 2 +-
arch/arm/boot/dts/exynos4412-midas.dtsi | 14 ++++++-------
arch/arm/boot/dts/exynos4412-n710x.dts | 2 +-
.../boot/dts/exynos4412-odroid-common.dtsi | 8 ++++----
arch/arm/boot/dts/exynos4412-odroidx.dts | 4 ++--
arch/arm/boot/dts/exynos4412-origen.dts | 14 ++++++-------
arch/arm/boot/dts/exynos4412-smdk4412.dts | 20 +++++++++----------
9 files changed, 37 insertions(+), 37 deletions(-)

diff --git a/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi b/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi
index 89ed81fb348d..912c78e9ce8c 100644
--- a/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi
+++ b/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi
@@ -15,7 +15,7 @@ aliases {
i2c10 = &i2c_cm36651;
};

- aat1290 {
+ led-controller {
compatible = "skyworks,aat1290";
flen-gpios = <&gpj1 1 GPIO_ACTIVE_HIGH>;
enset-gpios = <&gpj1 2 GPIO_ACTIVE_HIGH>;
@@ -60,7 +60,7 @@ i2c_ak8975: i2c-gpio-0 {
#size-cells = <0>;
status = "okay";

- ak8975@c {
+ magnetometer@c {
compatible = "asahi-kasei,ak8975";
reg = <0x0c>;
gpios = <&gpj0 7 GPIO_ACTIVE_HIGH>;
@@ -75,7 +75,7 @@ i2c_cm36651: i2c-gpio-2 {
#address-cells = <1>;
#size-cells = <0>;

- cm36651@18 {
+ light-sensor@18 {
compatible = "capella,cm36651";
reg = <0x18>;
interrupt-parent = <&gpx0>;
@@ -133,7 +133,7 @@ timing-0 {
};

&i2c_3 {
- mms114-touchscreen@48 {
+ touchscreen@48 {
compatible = "melfas,mms114";
reg = <0x48>;
interrupt-parent = <&gpm2>;
diff --git a/arch/arm/boot/dts/exynos4412-itop-elite.dts b/arch/arm/boot/dts/exynos4412-itop-elite.dts
index f6d0a5f5d339..47431307cb3c 100644
--- a/arch/arm/boot/dts/exynos4412-itop-elite.dts
+++ b/arch/arm/boot/dts/exynos4412-itop-elite.dts
@@ -175,7 +175,7 @@ &i2c_4 {
pinctrl-names = "default";
status = "okay";

- codec: wm8960@1a {
+ codec: audio-codec@1a {
compatible = "wlf,wm8960";
reg = <0x1a>;
clocks = <&pmu_system_controller 0>;
diff --git a/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi b/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi
index dfceb155b3a7..4583d342af39 100644
--- a/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi
+++ b/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi
@@ -134,7 +134,7 @@ &i2c_1 {
pinctrl-names = "default";
status = "okay";

- s5m8767: s5m8767-pmic@66 {
+ s5m8767: pmic@66 {
compatible = "samsung,s5m8767-pmic";
reg = <0x66>;

diff --git a/arch/arm/boot/dts/exynos4412-midas.dtsi b/arch/arm/boot/dts/exynos4412-midas.dtsi
index 7e7c243ff196..62a8918c0ea5 100644
--- a/arch/arm/boot/dts/exynos4412-midas.dtsi
+++ b/arch/arm/boot/dts/exynos4412-midas.dtsi
@@ -171,7 +171,7 @@ i2c_max77693: i2c-gpio-1 {
#size-cells = <0>;
status = "okay";

- max77693@66 {
+ pmic@66 {
compatible = "maxim,max77693";
interrupt-parent = <&gpx1>;
interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
@@ -220,7 +220,7 @@ i2c_max77693_fuel: i2c-gpio-3 {
#size-cells = <0>;
status = "okay";

- max77693-fuel-gauge@36 {
+ fuel-gauge@36 {
compatible = "maxim,max17047";
interrupt-parent = <&gpx2>;
interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
@@ -550,7 +550,7 @@ &i2c_0 {
pinctrl-names = "default";
status = "okay";

- s5c73m3: s5c73m3@3c {
+ s5c73m3: image-sensor@3c {
compatible = "samsung,s5c73m3";
reg = <0x3c>;
xshutdown-gpios = <&gpf1 3 GPIO_ACTIVE_LOW>; /* ISP_RESET */
@@ -577,7 +577,7 @@ &i2c1_isp {
pinctrl-0 = <&fimc_is_i2c1>;
pinctrl-names = "default";

- s5k6a3@10 {
+ image-sensor@10 {
compatible = "samsung,s5k6a3";
reg = <0x10>;
svdda-supply = <&cam_io_reg>;
@@ -616,7 +616,7 @@ &i2c_4 {
pinctrl-names = "default";
status = "okay";

- wm1811: wm1811@1a {
+ wm1811: audio-codec@1a {
compatible = "wlf,wm1811";
reg = <0x1a>;
clocks = <&pmu_system_controller 0>,
@@ -665,7 +665,7 @@ &i2c_7 {
pinctrl-names = "default";
status = "okay";

- max77686: max77686_pmic@9 {
+ max77686: pmic@9 {
compatible = "maxim,max77686";
interrupt-parent = <&gpx0>;
interrupts = <7 IRQ_TYPE_NONE>;
@@ -1407,7 +1407,7 @@ &spi_1 {
cs-gpios = <&gpb 5 GPIO_ACTIVE_HIGH>;
status = "okay";

- s5c73m3_spi: s5c73m3@0 {
+ s5c73m3_spi: image-sensor@0 {
compatible = "samsung,s5c73m3";
spi-max-frequency = <50000000>;
reg = <0>;
diff --git a/arch/arm/boot/dts/exynos4412-n710x.dts b/arch/arm/boot/dts/exynos4412-n710x.dts
index a47b7f35fc80..c49dbb7847b8 100644
--- a/arch/arm/boot/dts/exynos4412-n710x.dts
+++ b/arch/arm/boot/dts/exynos4412-n710x.dts
@@ -45,7 +45,7 @@ &i2c_3 {
pinctrl-names = "default";
status = "okay";

- mms152-touchscreen@48 {
+ touchscreen@48 {
compatible = "melfas,mms152";
reg = <0x48>;
interrupt-parent = <&gpm2>;
diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
index c3b6e6d367ab..2a6f5b1d7645 100644
--- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
+++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
@@ -27,7 +27,7 @@ gpio_keys: gpio-keys {
pinctrl-names = "default";
pinctrl-0 = <&gpio_power_key>;

- power_key {
+ power-key {
gpios = <&gpx1 3 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
label = "power key";
@@ -171,7 +171,7 @@ cooling_map1: map1 {
};

&pinctrl_1 {
- gpio_power_key: power_key {
+ gpio_power_key: power-key {
samsung,pins = "gpx1-3";
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
@@ -266,7 +266,7 @@ &i2c_0 {
samsung,i2c-max-bus-freq = <400000>;
status = "okay";

- usb3503: usb3503@8 {
+ usb3503: usb-hub@8 {
compatible = "smsc,usb3503";
reg = <0x08>;

@@ -492,7 +492,7 @@ buck8_reg: BUCK8 {

&i2c_1 {
status = "okay";
- max98090: max98090@10 {
+ max98090: audio-codec@10 {
compatible = "maxim,max98090";
reg = <0x10>;
interrupt-parent = <&gpx0>;
diff --git a/arch/arm/boot/dts/exynos4412-odroidx.dts b/arch/arm/boot/dts/exynos4412-odroidx.dts
index 68fe88074d1d..46381e9097f4 100644
--- a/arch/arm/boot/dts/exynos4412-odroidx.dts
+++ b/arch/arm/boot/dts/exynos4412-odroidx.dts
@@ -36,7 +36,7 @@ led2 {
};
};

- regulator_p3v3 {
+ regulator-1 {
compatible = "regulator-fixed";
regulator-name = "p3v3_en";
regulator-min-microvolt = <3300000>;
@@ -81,7 +81,7 @@ &mshc_0 {
};

&pinctrl_1 {
- gpio_home_key: home_key {
+ gpio_home_key: home-key {
samsung,pins = "gpx2-2";
samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
};
diff --git a/arch/arm/boot/dts/exynos4412-origen.dts b/arch/arm/boot/dts/exynos4412-origen.dts
index c2e793b69e7d..e1f6de53e20e 100644
--- a/arch/arm/boot/dts/exynos4412-origen.dts
+++ b/arch/arm/boot/dts/exynos4412-origen.dts
@@ -116,7 +116,7 @@ &i2c_0 {
pinctrl-names = "default";
status = "okay";

- s5m8767_pmic@66 {
+ pmic@66 {
compatible = "samsung,s5m8767-pmic";
reg = <0x66>;

@@ -453,37 +453,37 @@ &keypad {
pinctrl-names = "default";
status = "okay";

- key_home {
+ key-home {
keypad,row = <0>;
keypad,column = <0>;
linux,code = <KEY_HOME>;
};

- key_down {
+ key-down {
keypad,row = <0>;
keypad,column = <1>;
linux,code = <KEY_DOWN>;
};

- key_up {
+ key-up {
keypad,row = <1>;
keypad,column = <0>;
linux,code = <KEY_UP>;
};

- key_menu {
+ key-menu {
keypad,row = <1>;
keypad,column = <1>;
linux,code = <KEY_MENU>;
};

- key_back {
+ key-back {
keypad,row = <2>;
keypad,column = <0>;
linux,code = <KEY_BACK>;
};

- key_enter {
+ key-enter {
keypad,row = <2>;
keypad,column = <1>;
linux,code = <KEY_ENTER>;
diff --git a/arch/arm/boot/dts/exynos4412-smdk4412.dts b/arch/arm/boot/dts/exynos4412-smdk4412.dts
index 49971203a8aa..cc99b955af0c 100644
--- a/arch/arm/boot/dts/exynos4412-smdk4412.dts
+++ b/arch/arm/boot/dts/exynos4412-smdk4412.dts
@@ -71,61 +71,61 @@ &keypad {
pinctrl-names = "default";
status = "okay";

- key_1 {
+ key-1 {
keypad,row = <1>;
keypad,column = <3>;
linux,code = <2>;
};

- key_2 {
+ key-2 {
keypad,row = <1>;
keypad,column = <4>;
linux,code = <3>;
};

- key_3 {
+ key-3 {
keypad,row = <1>;
keypad,column = <5>;
linux,code = <4>;
};

- key_4 {
+ key-4 {
keypad,row = <1>;
keypad,column = <6>;
linux,code = <5>;
};

- key_5 {
+ key-5 {
keypad,row = <1>;
keypad,column = <7>;
linux,code = <6>;
};

- key_A {
+ key-A {
keypad,row = <2>;
keypad,column = <6>;
linux,code = <30>;
};

- key_B {
+ key-B {
keypad,row = <2>;
keypad,column = <7>;
linux,code = <48>;
};

- key_C {
+ key-C {
keypad,row = <0>;
keypad,column = <5>;
linux,code = <46>;
};

- key_D {
+ key-D {
keypad,row = <2>;
keypad,column = <5>;
linux,code = <32>;
};

- key_E {
+ key-E {
keypad,row = <0>;
keypad,column = <7>;
linux,code = <18>;
--
2.25.1
\
 
 \ /
  Last update: 2020-10-27 18:11    [W:0.472 / U:2.336 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site