Messages in this thread | | | From | Vaishnav M A <> | Subject | [RFC PATCH 0/5] Add serdev_device_id for platform instantiation | Date | Mon, 26 Oct 2020 23:27:13 +0530 |
| |
This patch series aims to add serdev_device_id to the serdev drivers so as to support platform instantiation of a serdev device.The first two patches adding the serdev_device_id has already been once submitted by Ricardo Ribalda Delgado(in CC) here: https://lore.kernel.org/lkml/20180611115240.32606-1-ricardo.ribalda@gmail.com/
The problem currently trying to solved is bit different from dynamically loading/removing serdev devices as addressed in the original patch series, the aim now is to attach a serdev driver once to a device that is not a part of the device tree or the ACPI table, Eg. a device on a greybus created gbphy uart.
The patches were tested with a set of uBlox GNSS Receiver Clicks on a PocketBeagle. The serdev_device_id table is exported only for a single driver(drivers/gnss/ubx.c) for reference.
Ricardo Ribalda (2): serdev: Add serdev_device_id file2alias: Support for serdev devices
Vaishnav M A (3): serdev: add of_ helper to get serdev controller gnss: ubx add MODULE_DEVICE_TABLE(serdev) gnss: change of_property_read to device_property_read
drivers/gnss/serial.c | 3 +- drivers/gnss/ubx.c | 9 +++++ drivers/tty/serdev/core.c | 58 +++++++++++++++++++++++++++---- include/linux/mod_devicetable.h | 10 ++++++ include/linux/serdev.h | 5 +++ scripts/mod/devicetable-offsets.c | 3 ++ scripts/mod/file2alias.c | 10 ++++++ 7 files changed, 90 insertions(+), 8 deletions(-)
-- 2.25.1
| |