lkml.org 
[lkml]   [2020]   [Oct]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] thermal: rcar: replace spin_lock_irqsave by spin_lock in hard IRQ
Date
On RT or even on mainline with 'threadirqs' on the command line all
interrupts which are not explicitly requested with IRQF_NO_THREAD
run their handlers in thread context. The same applies to soft interrupts.
That means they are subject to the normal scheduler rules and no other
code is going to acquire that lock from hard interrupt context either,
so the irqsave() here is pointless in all cases.

Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
---
drivers/thermal/rcar_thermal.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/thermal/rcar_thermal.c b/drivers/thermal/rcar_thermal.c
index 5c2a13b..6ae757d 100644
--- a/drivers/thermal/rcar_thermal.c
+++ b/drivers/thermal/rcar_thermal.c
@@ -409,16 +409,15 @@ static irqreturn_t rcar_thermal_irq(int irq, void *data)
{
struct rcar_thermal_common *common = data;
struct rcar_thermal_priv *priv;
- unsigned long flags;
u32 status, mask;

- spin_lock_irqsave(&common->lock, flags);
+ spin_lock(&common->lock);

mask = rcar_thermal_common_read(common, INTMSK);
status = rcar_thermal_common_read(common, STR);
rcar_thermal_common_write(common, STR, 0x000F0F0F & mask);

- spin_unlock_irqrestore(&common->lock, flags);
+ spin_unlock(&common->lock);

status = status & ~mask;

--
2.7.4
\
 
 \ /
  Last update: 2020-10-27 02:07    [W:0.055 / U:1.088 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site