lkml.org 
[lkml]   [2020]   [Oct]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v3 0/2] DCMI BT656 parallel bus mode support
Date
Add support of BT656 embedded synchronization bus.
This mode allows to save hardware synchro lines hsync & vsync
by replacing them with synchro codes embedded in data stream.
This mode is enabled when hsync-active & vsync-active
fields are not specified in devicetree.

===========
= history =
===========
version 3:
- Fix bus_width print to %u as per Sakari comment

version 2:
- As per Sakari remark, revisit commit message and document
BT656 parallel bus mode in bindings

version 1:
- Initial submission

Hugues Fruchet (2):
media: stm32-dcmi: add support of BT656 bus
media: dt-bindings: media: st,stm32-dcmi: Add support of BT656

.../devicetree/bindings/media/st,stm32-dcmi.yaml | 30 ++++++++++++++++++
drivers/media/platform/stm32/stm32-dcmi.c | 37 ++++++++++++++++++++--
2 files changed, 65 insertions(+), 2 deletions(-)

--
2.7.4

\
 
 \ /
  Last update: 2020-10-20 12:03    [W:0.033 / U:2.964 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site