lkml.org 
[lkml]   [2020]   [Oct]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
SubjectRe: [PATCH] usb: cdns3: platform_get_irq_byname_optional instead platform_get_irq_byname
From
Date
Pawel,

On 02/10/2020 12:08, Pawel Laszczak wrote:
> Roger,
>
>>
>> On 30/09/2020 09:57, Pawel Laszczak wrote:
>>> To avoid duplicate error information patch replaces platform_get_irq_byname
>>> into platform_get_irq_byname_optional.
>>
>> What is duplicate error information?
>
> The function platform_get_irq_byname print:
> " dev_err(&dev->dev, "IRQ %s not found\n", name);" if error occurred.
>
> In core.c we have the another error message below invoking this function.
> e.g
> if (cdns->dev_irq < 0)
> dev_err(dev, "couldn't get peripheral irq\n");
>
> So, it's looks like one dev_err is redundant.

If we want all 3 IRQs to be valid irrespective of dr_mode then we should
use platform_get_irq_byname() and error out in probe if (ret < 0 && ret != -EPROBE_DEFER).

We can get rid of the irq check and duplicate error message in other places.

cheers,
-roger

>
>>
>>>
>>> A change was suggested during reviewing CDNSP driver by Chunfeng Yun.
>>>
>>> Signed-off-by: Pawel Laszczak <pawell@cadence.com>
>>> ---
>>> drivers/usb/cdns3/core.c | 4 ++--
>>> 1 file changed, 2 insertions(+), 2 deletions(-)
>>>
>>> diff --git a/drivers/usb/cdns3/core.c b/drivers/usb/cdns3/core.c
>>> index a0f73d4711ae..a3f6dc44cf3a 100644
>>> --- a/drivers/usb/cdns3/core.c
>>> +++ b/drivers/usb/cdns3/core.c
>>> @@ -465,7 +465,7 @@ static int cdns3_probe(struct platform_device *pdev)
>>>
>>> cdns->xhci_res[1] = *res;
>>>
>>> - cdns->dev_irq = platform_get_irq_byname(pdev, "peripheral");
>>> + cdns->dev_irq = platform_get_irq_byname_optional(pdev, "peripheral");
>>
>> As per DT binding document, these are mandatory properties
>
> I think that name platform_get_irq_byname_optional is little confusing.
> Function descriptions show that both are almost identical:
> /**
> * platform_get_irq_byname_optional - get an optional IRQ for a device by name
> * @dev: platform device
> * @name: IRQ name
> *
> * Get an optional IRQ by name like platform_get_irq_byname(). Except that it
> * does not print an error message if an IRQ can not be obtained.
> *
> * Return: non-zero IRQ number on success, negative error number on failure.
> */
>
>>
>> - interrupts: Interrupts used by cdns3 controller:
>> "host" - interrupt used by XHCI driver.
>> "peripheral" - interrupt used by device driver
>> "otg" - interrupt used by DRD/OTG part of driver
>>
>> for dr_mode == "otg" -> all 3 are mandatory.
>> for dr_mode == "host" -> "otg" and "peripheral" IRQs are not required.
>> for dr_mode == "periphearal" -> "otg" and "host" IRQs are not required.
>>
>>> if (cdns->dev_irq == -EPROBE_DEFER)
>>> return cdns->dev_irq;
>>>
>>> @@ -477,7 +477,7 @@ static int cdns3_probe(struct platform_device *pdev)
>>> return PTR_ERR(regs);
>>> cdns->dev_regs = regs;
>>>
>>> - cdns->otg_irq = platform_get_irq_byname(pdev, "otg");
>>> + cdns->otg_irq = platform_get_irq_byname_optional(pdev, "otg");
>>> if (cdns->otg_irq == -EPROBE_DEFER)
>>> return cdns->otg_irq;
>>>
>>>
>>
>
> Regards,
> Pawel
>

--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

\
 
 \ /
  Last update: 2020-10-02 12:07    [W:0.069 / U:0.352 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site