lkml.org 
[lkml]   [2020]   [Oct]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
SubjectRE: [PATCH] usb: cdns3: platform_get_irq_byname_optional instead platform_get_irq_byname
Date
Roger,

>
>On 30/09/2020 09:57, Pawel Laszczak wrote:
>> To avoid duplicate error information patch replaces platform_get_irq_byname
>> into platform_get_irq_byname_optional.
>
>What is duplicate error information?

The function platform_get_irq_byname print:
" dev_err(&dev->dev, "IRQ %s not found\n", name);" if error occurred.

In core.c we have the another error message below invoking this function.
e.g
if (cdns->dev_irq < 0)
dev_err(dev, "couldn't get peripheral irq\n");

So, it's looks like one dev_err is redundant.

>
>>
>> A change was suggested during reviewing CDNSP driver by Chunfeng Yun.
>>
>> Signed-off-by: Pawel Laszczak <pawell@cadence.com>
>> ---
>> drivers/usb/cdns3/core.c | 4 ++--
>> 1 file changed, 2 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/usb/cdns3/core.c b/drivers/usb/cdns3/core.c
>> index a0f73d4711ae..a3f6dc44cf3a 100644
>> --- a/drivers/usb/cdns3/core.c
>> +++ b/drivers/usb/cdns3/core.c
>> @@ -465,7 +465,7 @@ static int cdns3_probe(struct platform_device *pdev)
>>
>> cdns->xhci_res[1] = *res;
>>
>> - cdns->dev_irq = platform_get_irq_byname(pdev, "peripheral");
>> + cdns->dev_irq = platform_get_irq_byname_optional(pdev, "peripheral");
>
>As per DT binding document, these are mandatory properties

I think that name platform_get_irq_byname_optional is little confusing.
Function descriptions show that both are almost identical:
/**
* platform_get_irq_byname_optional - get an optional IRQ for a device by name
* @dev: platform device
* @name: IRQ name
*
* Get an optional IRQ by name like platform_get_irq_byname(). Except that it
* does not print an error message if an IRQ can not be obtained.
*
* Return: non-zero IRQ number on success, negative error number on failure.
*/
>
> - interrupts: Interrupts used by cdns3 controller:
> "host" - interrupt used by XHCI driver.
> "peripheral" - interrupt used by device driver
> "otg" - interrupt used by DRD/OTG part of driver
>
>for dr_mode == "otg" -> all 3 are mandatory.
>for dr_mode == "host" -> "otg" and "peripheral" IRQs are not required.
>for dr_mode == "periphearal" -> "otg" and "host" IRQs are not required.
>
>> if (cdns->dev_irq == -EPROBE_DEFER)
>> return cdns->dev_irq;
>>
>> @@ -477,7 +477,7 @@ static int cdns3_probe(struct platform_device *pdev)
>> return PTR_ERR(regs);
>> cdns->dev_regs = regs;
>>
>> - cdns->otg_irq = platform_get_irq_byname(pdev, "otg");
>> + cdns->otg_irq = platform_get_irq_byname_optional(pdev, "otg");
>> if (cdns->otg_irq == -EPROBE_DEFER)
>> return cdns->otg_irq;
>>
>>
>

Regards,
Pawel
\
 
 \ /
  Last update: 2020-10-02 11:09    [W:0.154 / U:0.716 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site