lkml.org 
[lkml]   [2020]   [Oct]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] spi: spi-sun6i: enable autosuspend feature
Date
If SPI is used for periodic polling any sensor, significant delays
sometimes appear. Switching on module clocks during resume lead to delays.
Enabling autosuspend mode causes the controller to not suspend between
SPI transfers and the delays disappear.

Signed-off-by: Alexander Kochetkov <al.kochet@gmail.com>
---
drivers/spi/spi-sun6i.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/spi/spi-sun6i.c b/drivers/spi/spi-sun6i.c
index 38e5b8af7da6..4cc0280e934c 100644
--- a/drivers/spi/spi-sun6i.c
+++ b/drivers/spi/spi-sun6i.c
@@ -22,6 +22,8 @@

#include <linux/spi/spi.h>

+#define SUN6I_AUTOSUSPEND_TIMEOUT 2000
+
#define SUN6I_FIFO_DEPTH 128
#define SUN8I_FIFO_DEPTH 64

@@ -639,9 +641,10 @@ static int sun6i_spi_probe(struct platform_device *pdev)
goto err_free_dma_rx;
}

+ pm_runtime_set_autosuspend_delay(&pdev->dev, SUN6I_AUTOSUSPEND_TIMEOUT);
+ pm_runtime_use_autosuspend(&pdev->dev);
pm_runtime_set_active(&pdev->dev);
pm_runtime_enable(&pdev->dev);
- pm_runtime_idle(&pdev->dev);

ret = devm_spi_register_master(&pdev->dev, master);
if (ret) {
--
2.17.1
\
 
 \ /
  Last update: 2020-10-16 10:39    [W:0.064 / U:0.096 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site