Messages in this thread | | | From | Uwe Kleine-König <> | Subject | [PATCH v4 0/2] arm64: Add basic support for Kobol's Helios64 | Date | Wed, 14 Oct 2020 22:00:28 +0200 |
| |
Hello,
in v3 Johan still found some inconsistencies in how I sorted (or didn't sort) the device tree properties. The rules I applied now are:
at the beginning of a node: compatible, reg and interrupt stuff status and #* at the end i2c-scl-rising-time-ns before i2c-scl-falling-time-ns regulator-name first among regulator-* regulator-min-microvolt before regulator-max-microvolt pinctrl-names before pinctrl-0 tx_delay grouped with (and after) rx_delay vcc12* after vcc5* otherwise alphabetically
other things changed are:
- drop disable-wp and supports-emmc for emmc - use led-0 and led-1 as node names for the leds - rename pinctrl for the leds according to the line name in the schematic - drop linux,default-trigger = "none"; - add an enable gpio for the sd regulator - some whitespace nits
While testing I rebased to 5.9 and for an unknown reason this kernel fails to boot (just no output), but the resulting dtb works just fine with a Debian 5.8 kernel.
Uwe Kleine-König (2): dt-bindings: vendor-prefixes: Add kobol prefix arm64: dts: rockchip: Add basic support for Kobol's Helios64
.../devicetree/bindings/vendor-prefixes.yaml | 2 + arch/arm64/boot/dts/rockchip/Makefile | 1 + .../dts/rockchip/rk3399-kobol-helios64.dts | 371 ++++++++++++++++++ 3 files changed, 374 insertions(+) create mode 100644 arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts
-- 2.28.0
| |