lkml.org 
[lkml]   [2020]   [Jan]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[PATCH v2 1/2] dt-bindings: devantech-srf04.yaml: add pm feature
Add GPIO line and startup time for usage of power management

Signed-off-by: Andreas Klinger <ak@it-klinger.de>
---
.../iio/proximity/devantech-srf04.yaml | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)

diff --git a/Documentation/devicetree/bindings/iio/proximity/devantech-srf04.yaml b/Documentation/devicetree/bindings/iio/proximity/devantech-srf04.yaml
index 4e80ea7c1475..8afbac24c34e 100644
--- a/Documentation/devicetree/bindings/iio/proximity/devantech-srf04.yaml
+++ b/Documentation/devicetree/bindings/iio/proximity/devantech-srf04.yaml
@@ -51,6 +51,24 @@ properties:
the time between two interrupts is measured in the driver.
maxItems: 1

+ power-gpios:
+ description:
+ Definition of the GPIO for power management of connected peripheral
+ (output).
+ This GPIO can be used by the external hardware for power management.
+ When the device gets suspended it's switched off and when it resumes
+ it's switched on again. After some period of inactivity the driver
+ get suspended automatically (autosuspend feature).
+ maxItems: 1
+
+ startup-time-ms:
+ description:
+ This is the startup time the device needs after a resume to be up and
+ running.
+ minimum: 0
+ maximum: 1000
+ default: 100
+
required:
- compatible
- trig-gpios
--
2.20.1
\
 
 \ /
  Last update: 2020-01-09 09:39    [W:5.173 / U:0.868 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site