lkml.org 
[lkml]   [2020]   [Jan]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/3] dt-bindings: net: can: m_can: Add Documentation for stb-gpios
Date
The CAN transceiver on some boards has an STB pin which is
used to control its standby mode. Add an optional property
stb-gpios to toggle the same.

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
---
Documentation/devicetree/bindings/net/can/m_can.txt | 2 ++
1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/net/can/m_can.txt b/Documentation/devicetree/bindings/net/can/m_can.txt
index ed614383af9c..cc8ba3f7a2aa 100644
--- a/Documentation/devicetree/bindings/net/can/m_can.txt
+++ b/Documentation/devicetree/bindings/net/can/m_can.txt
@@ -48,6 +48,8 @@ Optional Subnode:
that can be used for CAN/CAN-FD modes. See
Documentation/devicetree/bindings/net/can/can-transceiver.txt
for details.
+stb-gpios : gpio node to toggle the STB (standby) signal on the transceiver
+
Example:
SoC dtsi:
m_can1: can@20e8000 {
--
2.19.2
\
 
 \ /
  Last update: 2020-01-22 09:03    [W:0.073 / U:0.420 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site