Messages in this thread | | | From | "Sriram Dash" <> | Subject | RE: [PATCH 2/3] can: m_can: m_can_platform: Add support for enabling transceiver through the STB line | Date | Wed, 22 Jan 2020 20:23:57 +0530 |
| |
> From: linux-can-owner@vger.kernel.org <linux-can-owner@vger.kernel.org> On > Behalf Of Faiz Abbas > Subject: [PATCH 2/3] can: m_can: m_can_platform: Add support for enabling > transceiver through the STB line > > CAN transceivers on some boards have an STB (standby) line which can be > toggled to enable/disable the transceiver. Add support for enabling the > transceiver using a GPIO connected to the STB line. >
Looks good to me. Other than Dan's concern on stb as standby, Acked-by: Sriram Dash <sriram.dash@samsung.com>
> Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> > --- > drivers/net/can/m_can/m_can_platform.c | 12 ++++++++++++ > 1 file changed, 12 insertions(+) > > diff --git a/drivers/net/can/m_can/m_can_platform.c > b/drivers/net/can/m_can/m_can_platform.c > index 38ea5e600fb8..b4e1423bd5d8 100644 > --- a/drivers/net/can/m_can/m_can_platform.c > +++ b/drivers/net/can/m_can/m_can_platform.c > @@ -6,6 +6,7 @@ > // Copyright (C) 2018-19 Texas Instruments Incorporated - http://www.ti.com/ > > #include <linux/platform_device.h> > +#include <linux/gpio/consumer.h> > > #include "m_can.h" > > @@ -57,6 +58,7 @@ static int m_can_plat_probe(struct platform_device *pdev) > { > struct m_can_classdev *mcan_class; > struct m_can_plat_priv *priv; > + struct gpio_desc *stb; > struct resource *res; > void __iomem *addr; > void __iomem *mram_addr; > @@ -111,6 +113,16 @@ static int m_can_plat_probe(struct platform_device > *pdev) > > m_can_init_ram(mcan_class); > > + stb = devm_gpiod_get_optional(&pdev->dev, "stb", GPIOD_OUT_HIGH); > + if (IS_ERR(stb)) { > + ret = PTR_ERR(stb); > + if (ret != -EPROBE_DEFER) > + dev_err(&pdev->dev, > + "gpio request failed, ret %d\n", ret); > + > + goto failed_ret; > + } > + > ret = m_can_class_register(mcan_class); > > failed_ret: > -- > 2.19.2
| |