lkml.org 
[lkml]   [2020]   [Jan]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v4 0/4] BQ25150/155 Driver introduction
Date
Hello

I am introducing the TI BQ25150/155 Charge driver.
The driver also supports the JEITA spec for Thermal battery management. This
support for Hot, Warm and Cool are being added to the power supply class.

Datasheets for these devices can be found at:
http://www.ti.com/lit/ds/symlink/bq25150.pdf
http://www.ti.com/lit/ds/symlink/bq25155.pdf

Dan

Dan Murphy (4):
power: supply: core: Update sysfs-class-power ABI document
power_supply: Add additional health properties to the header
dt-bindings: power: Add the bq2515x family dt bindings
power: supply: bq2515x: Introduce the bq2515x family

Documentation/ABI/testing/sysfs-class-power | 3 +-
.../bindings/power/supply/bq2515x.yaml | 85 ++
drivers/power/supply/Kconfig | 8 +
drivers/power/supply/Makefile | 1 +
drivers/power/supply/bq2515x_charger.c | 739 ++++++++++++++++++
drivers/power/supply/power_supply_sysfs.c | 2 +-
include/linux/power_supply.h | 3 +
7 files changed, 839 insertions(+), 2 deletions(-)
create mode 100644 Documentation/devicetree/bindings/power/supply/bq2515x.yaml
create mode 100644 drivers/power/supply/bq2515x_charger.c

--
2.25.0

\
 
 \ /
  Last update: 2020-01-16 18:54    [W:0.125 / U:0.688 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site