lkml.org 
[lkml]   [2020]   [Jan]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
Subject[GIT PULL] ARM: at91: DT for 5.6 #1
Arnd, Olof,

Here is the first AT91 DT pull request for 5.6. A few new boards and not
so urgent fixes this cycle. I may have a second pull request by then end
of the week with the sam9x60 device tree.

The following changes since commit e42617b825f8073569da76dc4510bfa019b1c35a:

Linux 5.5-rc1 (2019-12-08 14:57:55 -0800)

are available in the Git repository at:

git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux tags/at91-5.6-dt-1

for you to fetch changes up to a7e0f3fc01df4b1b7077df777c37feae8c9e8b6d:

ARM: dts: at91: sama5d3: define clock rate range for tcb1 (2020-01-10 18:25:14 +0100)

----------------------------------------------------------------
AT91 DT for 5.6

- Fix sama5d3 peripheral clock rate range
- New boards: Overkiz Smartikz and Kizbox Mini, Microchip SAMA5D27
wlsom1-ek
- sama5d2 sdmcc fixes

----------------------------------------------------------------
Alexandre Belloni (3):
ARM: dts: at91: nattis 2: remove unnecessary include
ARM: dts: at91: sama5d3: fix maximum peripheral clock rates
ARM: dts: at91: sama5d3: define clock rate range for tcb1

Andrei Stefanescu (1):
ARM: dts: at91: sama5d2: mark secumod as a GPIO controller

Eugen Hristev (3):
dt-bindings: ARM: at91: Document SAMA5D27 WLSOM1 and Evaluation Kit
ARM: dts: at91: sama5d27_wlsom1: add SAMA5D27 wlsom1 and wlsom1-ek
ARM: dts: at91: sama5d27_som1_ek: add i2c filters properties

Ingo van Lil (1):
ARM: dts: at91: Reenable UART TX pull-ups

Kamel Bouhara (3):
ARM: dts: at91: rearrange kizbox dts using aliases nodes
dt-bindings: arm: at91: Document Kizboxmini and Smartkiz boards binding
ARM: dts: at91: add smartkiz support and a common kizboxmini dtsi file

Ludovic Desroches (1):
ARM: dts: at91: sama5d2: set the sdmmc gclk frequency

Nicolas Ferre (1):
ARM: dts: at91: sama5d27_som1_ek: add the microchip,sdcal-inverted on sdmmc0

Razvan Stefanescu (1):
ARM: dts: at91: sama5d2: disable pwm0 by default

.../devicetree/bindings/arm/atmel-at91.yaml | 25 ++
arch/arm/boot/dts/Makefile | 6 +-
arch/arm/boot/dts/at91-kizbox.dts | 172 ++++++------
arch/arm/boot/dts/at91-kizboxmini-base.dts | 24 ++
...-kizboxmini.dts => at91-kizboxmini-common.dtsi} | 163 ++++++-----
arch/arm/boot/dts/at91-kizboxmini-mb.dts | 26 ++
arch/arm/boot/dts/at91-kizboxmini-rd.dts | 49 ++++
arch/arm/boot/dts/at91-nattis-2-natte-2.dts | 1 -
arch/arm/boot/dts/at91-sama5d27_som1.dtsi | 4 +
arch/arm/boot/dts/at91-sama5d27_som1_ek.dts | 6 +
arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi | 304 +++++++++++++++++++++
arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts | 270 ++++++++++++++++++
arch/arm/boot/dts/at91-smartkiz.dts | 109 ++++++++
arch/arm/boot/dts/at91sam9260.dtsi | 16 +-
arch/arm/boot/dts/at91sam9261.dtsi | 6 +-
arch/arm/boot/dts/at91sam9263.dtsi | 6 +-
arch/arm/boot/dts/at91sam9g45.dtsi | 8 +-
arch/arm/boot/dts/at91sam9rl.dtsi | 8 +-
arch/arm/boot/dts/sama5d2.dtsi | 10 +-
arch/arm/boot/dts/sama5d3.dtsi | 28 +-
arch/arm/boot/dts/sama5d3_can.dtsi | 4 +-
arch/arm/boot/dts/sama5d3_tcb1.dtsi | 1 +
arch/arm/boot/dts/sama5d3_uart.dtsi | 4 +-
23 files changed, 1037 insertions(+), 213 deletions(-)
create mode 100644 arch/arm/boot/dts/at91-kizboxmini-base.dts
rename arch/arm/boot/dts/{at91-kizboxmini.dts => at91-kizboxmini-common.dtsi} (51%)
create mode 100644 arch/arm/boot/dts/at91-kizboxmini-mb.dts
create mode 100644 arch/arm/boot/dts/at91-kizboxmini-rd.dts
create mode 100644 arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi
create mode 100644 arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts
create mode 100644 arch/arm/boot/dts/at91-smartkiz.dts

--
Alexandre Belloni, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

\
 
 \ /
  Last update: 2020-01-13 16:54    [W:0.055 / U:1.816 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site