lkml.org 
[lkml]   [2020]   [Jan]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 0/3] ARM: dts: sun8i: R40: DT fixes and updates
Date
Hi,

some changes I made to the R40 .dtsi when playing around with a
Bananapi M2 Berry board:
- The GICC region is wrongly reported as 4K only, preventing KVM
from using its VGIC emulation.
- The PMU node is missing, similar story as with the other SoCs: this
time the SPI numbers are not even mentioned in the manual.
- I hooked up a SPI flash to the PortC SPI0 header pins (from which
the board can even boot from). So patch 3 adds the SPI nodes and its
pinmux setup, in case people need this for their peripherals.

Please have a look and apply!

Cheers,
Andre.

Andre Przywara (3):
ARM: dts: sun8i: R40: Upgrade GICC reg size to 8K
ARM: dts: sun8i: R40: Add PMU node
ARM: dts: sun8i: R40: Add SPI controllers nodes and pinmuxes

arch/arm/boot/dts/sun8i-r40.dtsi | 108 +++++++++++++++++++++++++++++++++++++--
1 file changed, 103 insertions(+), 5 deletions(-)

--
2.14.5

\
 
 \ /
  Last update: 2020-01-02 02:29    [W:0.112 / U:0.208 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site