lkml.org 
[lkml]   [2019]   [Sep]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] watchdog: meson: Fix the wrong value of left time
Date
The left time value is wrong when we get it by sysfs. The left time value
should be equal to preset timeout value minus elapsed time value. According
to the Meson-GXB/GXL datasheets which can be found at [0], the timeout value
is saved to BIT[0-15] of the WATCHDOG_TCNT, and elapsed time value is saved
to BIT[16-31] of the WATCHDOG_TCNT.

[0]: http://linux-meson.com

Fixes: 683fa50f0e18 ("watchdog: Add Meson GXBB Watchdog Driver")
Signed-off-by: Xingyu Chen <xingyu.chen@amlogic.com>
---
drivers/watchdog/meson_gxbb_wdt.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/watchdog/meson_gxbb_wdt.c b/drivers/watchdog/meson_gxbb_wdt.c
index d17c1a6..5a9ca10 100644
--- a/drivers/watchdog/meson_gxbb_wdt.c
+++ b/drivers/watchdog/meson_gxbb_wdt.c
@@ -89,8 +89,8 @@ static unsigned int meson_gxbb_wdt_get_timeleft(struct watchdog_device *wdt_dev)

reg = readl(data->reg_base + GXBB_WDT_TCNT_REG);

- return ((reg >> GXBB_WDT_TCNT_CNT_SHIFT) -
- (reg & GXBB_WDT_TCNT_SETUP_MASK)) / 1000;
+ return ((reg & GXBB_WDT_TCNT_SETUP_MASK) -
+ (reg >> GXBB_WDT_TCNT_CNT_SHIFT)) / 1000;
}

static const struct watchdog_ops meson_gxbb_wdt_ops = {
--
2.7.4
\
 
 \ /
  Last update: 2019-09-29 12:54    [W:0.046 / U:1.156 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site