lkml.org 
[lkml]   [2019]   [Sep]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 0/4] pwm: mxs: add support for setting polarity via DT
Date
This series adds support for setting the polarity via DT to the
pwm-mxs driver.

The DT binding is updated, but I'm not touching the existing .dts or
.dtsi files - it seems that the same was done for bcm2835 in commits
46421d9d8e802e570dfa4d793a4938d2642ec7a7 and
8a88b2a2017d1e7e80db53080baff591fd454722, while
arch/arm/boot/dts/bcm283x.dtsi still has #pwm-cells = <2>.

Rasmus Villemoes (4):
pwm: mxs: implement ->apply
pwm: mxs: remove legacy methods
pwm: mxs: add support for inverse polarity
dt-bindings: pwm: mxs-pwm: Increase #pwm-cells

.../devicetree/bindings/pwm/mxs-pwm.txt | 4 +-
drivers/pwm/pwm-mxs.c | 73 ++++++++-----------
2 files changed, 34 insertions(+), 43 deletions(-)

--
2.20.1

\
 
 \ /
  Last update: 2019-09-23 10:14    [W:0.082 / U:0.608 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site