lkml.org 
[lkml]   [2019]   [Sep]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 00/35] irqchip/gic-v4: GICv4.1 architecture support
Date
[Apologies for posting this during the merge window, I'm fighting against
another deadline which is incompatible with the -rc1 time frame]

This rather long series expands the existing GICv4 support to deal with the
new GICv4.1 architecture, which comes with a set of major improvements
compared to v4.0:

- One architectural doorbell per vcpu, instead of one doorbell per VLPI

- Doorbell entirely managed by the HW, with an "at most once" delivery
guarantee per non-residency phase and only when requested by the
hypervisor

- A shared memory scheme between ITSs and redistributors, allowing for an
optimised residency sequence (the use of VMOVP becomes less frequent)

- Support for direct virtual SGI delivery (the injection path still involves
the hypervisor), at the cost of losing the active state on SGIs. It
shouldn't be a big deal, but some guest operating systems might notice
(Linux definitely won't care)

On the other hand, public documentation is not available yet, so that's a
bit annoying..

The series is roughly organised in 5 parts:

(1) A bunch of reworks to make the checking of some features more
straightforward,
(2) VPE table allocation, new flavours of VMAPP/VMOVP commands
(3) v4.1 doorbell management
(4) Virtual SGI support
(5) Plumbing of virtual SGIs in KVM

Note that patch #1 has been previously posted, and forms the base of this
work. This has had *very little* testing on a fairly early model, and some
behaviours are unexpected (the VSGI feature clearly misbehaves). But it is
in a shape that should make it possible to review and even debug. Consider
this an opportunity to influence the shape of this code at an early stage!
;-)


Marc Zyngier (35):
KVM: arm64: vgic-v4: Move the GICv4 residency flow to be driven by
vcpu_load/put
irqchip/gic-v3-its: Factor out wait_for_syncr primitive
irqchip/gic-v3-its: Allow LPI invalidation via the DirectLPI interface
irqchip/gic-v3: Detect GICv4.1 supporting RVPEID
irqchip/gic-v3: Add GICv4.1 VPEID size discovery
irqchip/gic-v3-its: Make is_v4 use a TYPER copy
irqchip/gic-v3-its: Kill its->ite_size and use TYPER copy instead
irqchip/gic-v3-its: Kill its->device_ids and use TYPER copy instead
irqchip/gic-v3-its: Add get_vlpi_map() helper
irqchip/gic-v4.1: VPE table (aka GICR_VPROPBASER) allocation
irqchip/gic-v4.1: Implement the v4.1 flavour of VMAPP
irqchip/gic-v4.1: Don't use the VPE proxy if RVPEID is set
irqchip/gic-v4.1: Implement the v4.1 flavour of VMOVP
irqchip/gic-v4.1: Plumb skeletal VPE irqchip
irqchip/gic-v4.1: Add mask/unmask doorbell callbacks
irqchip/gic-v4.1: Add VPE residency callback
irqchip/gic-v4.1: Add VPE eviction callback
irqchip/gic-v4.1: Add VPE INVALL callback
irqchip/gic-v4.1: Suppress per-VLPI doorbell
irqchip/gic-v4.1: Allow direct invalidation of VLPIs
irqchip/gic-v4.1: Advertise support v4.1 to KVM
irqchip/gic-v4.1: Map the ITS SGIR register page
irqchip/gic-v4.1: Plumb skeletal VSGI irqchip
irqchip/gic-v4.1: Add initial SGI configuration
irqchip/gic-v4.1: Plumb mask/unmask SGI callbacks
irqchip/gic-v4.1: Plumb get/set_irqchip_state SGI callbacks
irqchip/gic-v4.1: Plumb set_vcpu_affinity SGI callbacks
irqchip/gic-v4.1: Move doorbell management to the GICv4 abstraction
layer
irqchip/gic-v4.1: Add VSGI allocation/teardown
irqchip/gic-v4.1: Add VSGI property setup
irqchip/gic-v4.1: Eagerly vmap vPEs
KVM: arm64: GICv4.1: Let doorbells be auto-enabled
KVM: arm64: GICv4.1: Add direct injection capability to SGI registers
KVM: arm64: GICv4.1: Configure SGIs as HW interrupts
KVM: arm64: GICv4.1: Expose HW-based SGIs in debugfs

arch/arm/include/asm/arch_gicv3.h | 2 +
arch/arm64/include/asm/arch_gicv3.h | 1 +
drivers/irqchip/irq-gic-v3-its.c | 1099 +++++++++++++++++++++---
drivers/irqchip/irq-gic-v3.c | 25 +-
drivers/irqchip/irq-gic-v4.c | 143 ++-
include/kvm/arm_vgic.h | 5 +-
include/linux/irqchip/arm-gic-common.h | 2 +
include/linux/irqchip/arm-gic-v3.h | 75 +-
include/linux/irqchip/arm-gic-v4.h | 45 +-
virt/kvm/arm/arm.c | 12 +-
virt/kvm/arm/vgic/vgic-debug.c | 14 +-
virt/kvm/arm/vgic/vgic-mmio-v3.c | 15 +-
virt/kvm/arm/vgic/vgic-mmio.c | 88 +-
virt/kvm/arm/vgic/vgic-v3.c | 5 +
virt/kvm/arm/vgic/vgic-v4.c | 106 ++-
virt/kvm/arm/vgic/vgic.c | 4 -
virt/kvm/arm/vgic/vgic.h | 2 -
17 files changed, 1466 insertions(+), 177 deletions(-)

--
2.20.1

\
 
 \ /
  Last update: 2019-09-23 20:27    [W:0.476 / U:0.112 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site