lkml.org 
[lkml]   [2019]   [Sep]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] NTB: fix IDT Kconfig typos/spellos
Date
From: Randy Dunlap <rdunlap@infradead.org>

Fix typos in drivers/ntb/hw/idt/Kconfig.
Use consistent spelling and capitalization.

Fixes: bf2a952d31d2 ("NTB: Add IDT 89HPESxNTx PCIe-switches support")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jon Mason <jdmason@kudzu.us>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Allen Hubbe <allenbh@gmail.com>
Cc: Serge Semin <fancer.lancer@gmail.com>
Cc: linux-ntb@googlegroups.com
---
drivers/ntb/hw/idt/Kconfig | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)

--- lnx-53.orig/drivers/ntb/hw/idt/Kconfig
+++ lnx-53/drivers/ntb/hw/idt/Kconfig
@@ -4,11 +4,11 @@ config NTB_IDT
depends on PCI
select HWMON
help
- This driver supports NTB of cappable IDT PCIe-switches.
+ This driver supports NTB of capable IDT PCIe-switches.

Some of the pre-initializations must be made before IDT PCIe-switch
- exposes it NT-functions correctly. It should be done by either proper
- initialisation of EEPROM connected to master smbus of the switch or
+ exposes its NT-functions correctly. It should be done by either proper
+ initialization of EEPROM connected to master SMbus of the switch or
by BIOS using slave-SMBus interface changing corresponding registers
value. Evidently it must be done before PCI bus enumeration is
finished in Linux kernel.

\
 
 \ /
  Last update: 2019-09-18 22:59    [W:0.036 / U:0.156 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site