lkml.org 
[lkml]   [2019]   [Sep]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 5/8] cpufreq: ti-cpufreq: omap36xx use "cpu0","vbb" if run in multi_regulator mode
Date
In preparation for using the multi_regulator capability of
this driver for handling the ABB LDO for OPP1G of the omap36xx
we have to take care that the (legacy) vdd-supply name is
cpu0-supply = <&vcc>;

To do this we add another field to the SoC description table which
optionally can specify a list of regulator names.

For omap36xx we define "cpu0-supply" and "vbb-supply".

The default remains "vdd-supply" and "vbb-supply".

Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
---
.../devicetree/bindings/cpufreq/ti-cpufreq.txt | 6 +++++-
drivers/cpufreq/ti-cpufreq.c | 12 ++++++++++--
2 files changed, 15 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/cpufreq/ti-cpufreq.txt b/Documentation/devicetree/bindings/cpufreq/ti-cpufreq.txt
index 0c38e4b8fc51..1758051798fe 100644
--- a/Documentation/devicetree/bindings/cpufreq/ti-cpufreq.txt
+++ b/Documentation/devicetree/bindings/cpufreq/ti-cpufreq.txt
@@ -15,12 +15,16 @@ In 'cpus' nodes:

In 'operating-points-v2' table:
- compatible: Should be
- - 'operating-points-v2-ti-cpu' for am335x, am43xx, and dra7xx/am57xx SoCs
+ - 'operating-points-v2-ti-cpu' for am335x, am43xx, and dra7xx/am57xx,
+ omap34xx, omap36xx and am3517 SoCs
- syscon: A phandle pointing to a syscon node representing the control module
register space of the SoC.

Optional properties:
--------------------
+- "vdd-supply", "vbb-supply": to define two regulators for dra7xx
+- "cpu0-supply", "vbb-supply": to define two regulators for omap36xx
+
For each opp entry in 'operating-points-v2' table:
- opp-supported-hw: Two bitfields indicating:
1. Which revision of the SoC the OPP is supported by
diff --git a/drivers/cpufreq/ti-cpufreq.c b/drivers/cpufreq/ti-cpufreq.c
index f2f58d689320..1a3073a3093e 100644
--- a/drivers/cpufreq/ti-cpufreq.c
+++ b/drivers/cpufreq/ti-cpufreq.c
@@ -41,6 +41,7 @@
struct ti_cpufreq_data;

struct ti_cpufreq_soc_data {
+ const char * const *reg_names;
unsigned long (*efuse_xlate)(struct ti_cpufreq_data *opp_data,
unsigned long efuse);
unsigned long efuse_fallback;
@@ -164,7 +165,10 @@ static struct ti_cpufreq_soc_data omap34xx_soc_data = {
* seems to always read as 0).
*/

+static const char * const omap3_reg_names[] = {"cpu0", "vbb"};
+
static struct ti_cpufreq_soc_data omap36xx_soc_data = {
+ .reg_names = omap3_reg_names,
.efuse_xlate = omap3_efuse_xlate,
.efuse_offset = OMAP3_CONTROL_DEVICE_STATUS - OMAP3_SYSCON_BASE,
.efuse_shift = 9,
@@ -298,7 +302,7 @@ static int ti_cpufreq_probe(struct platform_device *pdev)
const struct of_device_id *match;
struct opp_table *ti_opp_table;
struct ti_cpufreq_data *opp_data;
- const char * const reg_names[] = {"vdd", "vbb"};
+ const char * const default_reg_names[] = {"vdd", "vbb"};
int ret;

match = dev_get_platdata(&pdev->dev);
@@ -354,9 +358,13 @@ static int ti_cpufreq_probe(struct platform_device *pdev)
opp_data->opp_table = ti_opp_table;

if (opp_data->soc_data->multi_regulator) {
+ const char * const *reg_names = default_reg_names;
+
+ if (opp_data->soc_data->reg_names)
+ reg_names = opp_data->soc_data->reg_names;
ti_opp_table = dev_pm_opp_set_regulators(opp_data->cpu_dev,
reg_names,
- ARRAY_SIZE(reg_names));
+ ARRAY_SIZE(default_reg_names));
if (IS_ERR(ti_opp_table)) {
dev_pm_opp_put_supported_hw(opp_data->opp_table);
ret = PTR_ERR(ti_opp_table);
--
2.19.1
\
 
 \ /
  Last update: 2019-09-11 19:48    [W:0.152 / U:0.372 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site