lkml.org 
[lkml]   [2019]   [Sep]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH V2 net-next 4/7] net: hns3: fix port setting handle for fibre port
Date
From: Guangbin Huang <huangguangbin2@huawei.com>

For hardware doesn't support use specified speed and duplex
to negotiate, it's unnecessary to check and modify the port
speed and duplex for fibre port when autoneg is on.

Fixes: 22f48e24a23d ("net: hns3: add autoneg and change speed support for fibre port")
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
---
drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c | 15 +++++++++++++++
1 file changed, 15 insertions(+)

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c b/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c
index f5a681d..680c350 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c
@@ -726,6 +726,12 @@ static int hns3_check_ksettings_param(const struct net_device *netdev,
u8 duplex;
int ret;

+ /* hw doesn't support use specified speed and duplex to negotiate,
+ * unnecessary to check them when autoneg on.
+ */
+ if (cmd->base.autoneg)
+ return 0;
+
if (ops->get_ksettings_an_result) {
ops->get_ksettings_an_result(handle, &autoneg, &speed, &duplex);
if (cmd->base.autoneg == autoneg && cmd->base.speed == speed &&
@@ -787,6 +793,15 @@ static int hns3_set_link_ksettings(struct net_device *netdev,
return ret;
}

+ /* hw doesn't support use specified speed and duplex to negotiate,
+ * ignore them when autoneg on.
+ */
+ if (cmd->base.autoneg) {
+ netdev_info(netdev,
+ "autoneg is on, ignore the speed and duplex\n");
+ return 0;
+ }
+
if (ops->cfg_mac_speed_dup_h)
ret = ops->cfg_mac_speed_dup_h(handle, cmd->base.speed,
cmd->base.duplex);
--
2.7.4
\
 
 \ /
  Last update: 2019-09-11 04:43    [W:0.063 / U:0.476 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site