lkml.org 
[lkml]   [2019]   [Aug]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 05/19] irqchip/mmp: do not use of_address_to_resource() to get mux regs
From
Date
On 09/08/2019 10:31, Lubomir Rintel wrote:
> The "regs" property of the "mrvl,mmp2-mux-intc" devices are silly. They
> are offsets from intc's base, not addresses on the parent bus. At this
> point it probably can't be fixed.
>
> On an OLPC XO-1.75 machine, the muxes are children of the intc, not the
> axi bus, and thus of_address_to_resource() won't work. We should treat
> the values as mere integers as opposed to bus addresses.
>
> Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
> Acked-by: Pavel Machek <pavel@ucw.cz>
>
> ---
> drivers/irqchip/irq-mmp.c | 20 +++++++++++---------
> 1 file changed, 11 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/irqchip/irq-mmp.c b/drivers/irqchip/irq-mmp.c
> index 14618dc0bd396..af9cba4a51c2e 100644
> --- a/drivers/irqchip/irq-mmp.c
> +++ b/drivers/irqchip/irq-mmp.c
> @@ -424,9 +424,9 @@ IRQCHIP_DECLARE(mmp2_intc, "mrvl,mmp2-intc", mmp2_of_init);
> static int __init mmp2_mux_of_init(struct device_node *node,
> struct device_node *parent)
> {
> - struct resource res;
> int i, ret, irq, j = 0;
> u32 nr_irqs, mfp_irq;
> + u32 reg[4];
>
> if (!parent)
> return -ENODEV;
> @@ -438,18 +438,20 @@ static int __init mmp2_mux_of_init(struct device_node *node,
> pr_err("Not found mrvl,intc-nr-irqs property\n");
> return -EINVAL;
> }
> - ret = of_address_to_resource(node, 0, &res);
> +
> + /*
> + * For historical reasonsm, the "regs" property of the
> + * mrvl,mmp2-mux-intc is not a regular * "regs" property containing
> + * addresses on the parent bus, but offsets from the intc's base.
> + * That is why we can't use of_address_to_resource() here.
> + */
> + ret = of_property_read_u32_array(node, "reg", reg, ARRAY_SIZE(reg));

This will return 0 even if you've read less than your expected 4 u32s.
You may want to try of_property_read_variable_u32_array instead.

> if (ret < 0) {
> pr_err("Not found reg property\n");
> return -EINVAL;
> }
> - icu_data[i].reg_status = mmp_icu_base + res.start;
> - ret = of_address_to_resource(node, 1, &res);
> - if (ret < 0) {
> - pr_err("Not found reg property\n");
> - return -EINVAL;
> - }
> - icu_data[i].reg_mask = mmp_icu_base + res.start;
> + icu_data[i].reg_status = mmp_icu_base + reg[0];
> + icu_data[i].reg_mask = mmp_icu_base + reg[2];
> icu_data[i].cascade_irq = irq_of_parse_and_map(node, 0);
> if (!icu_data[i].cascade_irq)
> return -EINVAL;
>

Thanks,

M.
--
Jazz is not dead, it just smells funny...

\
 
 \ /
  Last update: 2019-08-09 14:13    [W:0.291 / U:0.076 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site