lkml.org 
[lkml]   [2019]   [Aug]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 03/19] dt-bindings: mrvl,intc: Add a MMP3 interrupt controller
Date
Similar to MMP2 one, but has an extra range for the other core. The
muxes stay the same.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
---
.../interrupt-controller/mrvl,intc.txt | 23 ++++++++++++++-----
1 file changed, 17 insertions(+), 6 deletions(-)

diff --git a/Documentation/devicetree/bindings/interrupt-controller/mrvl,intc.txt b/Documentation/devicetree/bindings/interrupt-controller/mrvl,intc.txt
index 608fee15a4cfc..41c131d026f94 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/mrvl,intc.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/mrvl,intc.txt
@@ -1,13 +1,15 @@
* Marvell MMP Interrupt controller

Required properties:
-- compatible : Should be "mrvl,mmp-intc", "mrvl,mmp2-intc" or
- "mrvl,mmp2-mux-intc"
+- compatible : Should be "mrvl,mmp-intc", "mrvl,mmp2-intc",
+ "marvell,mmp3-intc", "mrvl,mmp2-mux-intc"
- reg : Address and length of the register set of the interrupt controller.
If the interrupt controller is intc, address and length means the range
- of the whole interrupt controller. If the interrupt controller is mux-intc,
- address and length means one register. Since address of mux-intc is in the
- range of intc. mux-intc is secondary interrupt controller.
+ of the whole interrupt controller. The "marvell,mmp3-intc" controller
+ also has a secondary range for the second CPU core. If the interrupt
+ controller is mux-intc, address and length means one register. Since
+ address of mux-intc is in the range of intc. mux-intc is secondary
+ interrupt controller.
- reg-names : Name of the register set of the interrupt controller. It's
only required in mux-intc interrupt controller.
- interrupts : Should be the port interrupt shared by mux interrupts. It's
@@ -20,7 +22,7 @@ Required properties:
- mrvl,clr-mfp-irq : Specifies the interrupt that needs to clear MFP edge
detection first.

-Example:
+Examples:
intc: interrupt-controller@d4282000 {
compatible = "mrvl,mmp2-intc";
interrupt-controller;
@@ -29,6 +31,15 @@ Example:
mrvl,intc-nr-irqs = <64>;
};

+ intc: interrupt-controller@d4282000 {
+ compatible = "marvell,mmp3-intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = <0xd4282000 0x1000>,
+ <0xd4284000 0x100>;
+ mrvl,intc-nr-irqs = <64>;
+ };
+
intcmux4@d4282150 {
compatible = "mrvl,mmp2-mux-intc";
interrupts = <4>;
--
2.21.0
\
 
 \ /
  Last update: 2019-08-09 11:33    [W:0.294 / U:1.036 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site