lkml.org 
[lkml]   [2019]   [Aug]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH v2 07/10] PCI: layerscape: Modify the MSIX to the doorbell way
On Sat, Aug 24, 2019 at 12:08:40AM +0000, Xiaowei Bao wrote:
>
>
> > -----Original Message-----
> > From: Andrew Murray <andrew.murray@arm.com>
> > Sent: 2019年8月23日 21:58
> > To: Xiaowei Bao <xiaowei.bao@nxp.com>
> > Cc: bhelgaas@google.com; robh+dt@kernel.org; mark.rutland@arm.com;
> > shawnguo@kernel.org; Leo Li <leoyang.li@nxp.com>; kishon@ti.com;
> > lorenzo.pieralisi@arm.co; arnd@arndb.de; gregkh@linuxfoundation.org; M.h.
> > Lian <minghuan.lian@nxp.com>; Mingkai Hu <mingkai.hu@nxp.com>; Roy
> > Zang <roy.zang@nxp.com>; jingoohan1@gmail.com;
> > gustavo.pimentel@synopsys.com; linux-pci@vger.kernel.org;
> > devicetree@vger.kernel.org; linux-kernel@vger.kernel.org;
> > linux-arm-kernel@lists.infradead.org; linuxppc-dev@lists.ozlabs.org
> > Subject: Re: [PATCH v2 07/10] PCI: layerscape: Modify the MSIX to the
> > doorbell way
> >
> > On Thu, Aug 22, 2019 at 07:22:39PM +0800, Xiaowei Bao wrote:
> > > The layerscape platform use the doorbell way to trigger MSIX interrupt
> > > in EP mode.
> > >
> >
> > I have no problems with this patch, however...
> >
> > Are you able to add to this message a reason for why you are making this
> > change? Did dw_pcie_ep_raise_msix_irq not work when func_no != 0? Or did
> > it work yet dw_pcie_ep_raise_msix_irq_doorbell is more efficient?
>
> The fact is that, this driver is verified in ls1046a platform of NXP before, and ls1046a don't
> support MSIX feature, so I set the msix_capable of pci_epc_features struct is false,
> but in other platform, e.g. ls1088a, it support the MSIX feature, I verified the MSIX
> feature in ls1088a, it is not OK, so I changed to another way. Thanks.

Right, so the existing pci-layerscape-ep.c driver never supported MSIX yet it
erroneously had a switch case statement to call dw_pcie_ep_raise_msix_irq which
would never get used.

Now that we're adding a platform with MSIX support the existing
dw_pcie_ep_raise_msix_irq doesn't work (for this platform) so we are adding a
different method.

Given that dw_pcie_ep_raise_msix_irq is used by pcie-designware-plat.c we
can assume this function at least works for it's use case.

Please update the commit message - It would be helpful to suggest that
dw_pcie_ep_raise_msix_irq was never called in the exisitng driver because
msix_capable was always set to false.

Thanks,

Andrew Murray

>
> >
> > Thanks,
> >
> > Andrew Murray
> >
> > > Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com>
> > > ---
> > > v2:
> > > - No change.
> > >
> > > drivers/pci/controller/dwc/pci-layerscape-ep.c | 3 ++-
> > > 1 file changed, 2 insertions(+), 1 deletion(-)
> > >
> > > diff --git a/drivers/pci/controller/dwc/pci-layerscape-ep.c
> > > b/drivers/pci/controller/dwc/pci-layerscape-ep.c
> > > index 8461f62..7ca5fe8 100644
> > > --- a/drivers/pci/controller/dwc/pci-layerscape-ep.c
> > > +++ b/drivers/pci/controller/dwc/pci-layerscape-ep.c
> > > @@ -74,7 +74,8 @@ static int ls_pcie_ep_raise_irq(struct dw_pcie_ep *ep,
> > u8 func_no,
> > > case PCI_EPC_IRQ_MSI:
> > > return dw_pcie_ep_raise_msi_irq(ep, func_no, interrupt_num);
> > > case PCI_EPC_IRQ_MSIX:
> > > - return dw_pcie_ep_raise_msix_irq(ep, func_no, interrupt_num);
> > > + return dw_pcie_ep_raise_msix_irq_doorbell(ep, func_no,
> > > + interrupt_num);
> > > default:
> > > dev_err(pci->dev, "UNKNOWN IRQ type\n");
> > > return -EINVAL;
> > > --
> > > 2.9.5
> > >

\
 
 \ /
  Last update: 2019-08-27 15:25    [W:0.078 / U:1.744 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site