lkml.org 
[lkml]   [2019]   [Nov]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 07/10] PCI: layerscape: Modify the MSIX to the doorbell way
On Thu, Aug 29, 2019 at 10:43:18AM +0530, Kishon Vijay Abraham I wrote:
> Gustavo,
>
> On 27/08/19 6:55 PM, Andrew Murray wrote:
> > On Sat, Aug 24, 2019 at 12:08:40AM +0000, Xiaowei Bao wrote:
> >>
> >>
> >>> -----Original Message-----
> >>> From: Andrew Murray <andrew.murray@arm.com>
> >>> Sent: 2019年8月23日 21:58
> >>> To: Xiaowei Bao <xiaowei.bao@nxp.com>
> >>> Cc: bhelgaas@google.com; robh+dt@kernel.org; mark.rutland@arm.com;
> >>> shawnguo@kernel.org; Leo Li <leoyang.li@nxp.com>; kishon@ti.com;
> >>> lorenzo.pieralisi@arm.co; arnd@arndb.de; gregkh@linuxfoundation.org; M.h.
> >>> Lian <minghuan.lian@nxp.com>; Mingkai Hu <mingkai.hu@nxp.com>; Roy
> >>> Zang <roy.zang@nxp.com>; jingoohan1@gmail.com;
> >>> gustavo.pimentel@synopsys.com; linux-pci@vger.kernel.org;
> >>> devicetree@vger.kernel.org; linux-kernel@vger.kernel.org;
> >>> linux-arm-kernel@lists.infradead.org; linuxppc-dev@lists.ozlabs.org
> >>> Subject: Re: [PATCH v2 07/10] PCI: layerscape: Modify the MSIX to the
> >>> doorbell way
> >>>
> >>> On Thu, Aug 22, 2019 at 07:22:39PM +0800, Xiaowei Bao wrote:
> >>>> The layerscape platform use the doorbell way to trigger MSIX interrupt
> >>>> in EP mode.
> >>>>
> >>>
> >>> I have no problems with this patch, however...
> >>>
> >>> Are you able to add to this message a reason for why you are making this
> >>> change? Did dw_pcie_ep_raise_msix_irq not work when func_no != 0? Or did
> >>> it work yet dw_pcie_ep_raise_msix_irq_doorbell is more efficient?
> >>
> >> The fact is that, this driver is verified in ls1046a platform of NXP before, and ls1046a don't
> >> support MSIX feature, so I set the msix_capable of pci_epc_features struct is false,
> >> but in other platform, e.g. ls1088a, it support the MSIX feature, I verified the MSIX
> >> feature in ls1088a, it is not OK, so I changed to another way. Thanks.
> >
> > Right, so the existing pci-layerscape-ep.c driver never supported MSIX yet it
> > erroneously had a switch case statement to call dw_pcie_ep_raise_msix_irq which
> > would never get used.
> >
> > Now that we're adding a platform with MSIX support the existing
> > dw_pcie_ep_raise_msix_irq doesn't work (for this platform) so we are adding a
> > different method.
>
> Gustavo, can you confirm dw_pcie_ep_raise_msix_irq() works for
> designware as it didn't work for both me and Xiaowei?

This question needs an answer.

Thanks,
Lorenzo

\
 
 \ /
  Last update: 2019-11-05 21:55    [W:0.241 / U:0.072 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site