lkml.org 
[lkml]   [2019]   [Aug]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v2 net] Add genphy_c45_config_aneg() function to phy-c45.c
From
From: Marco Hartmann <marco.hartmann@nxp.com>
Date: Wed, 21 Aug 2019 11:00:46 +0000

> Commit 34786005eca3 ("net: phy: prevent PHYs w/o Clause 22 regs from calling
> genphy_config_aneg") introduced a check that aborts phy_config_aneg()
> if the phy is a C45 phy.
> This causes phy_state_machine() to call phy_error() so that the phy
> ends up in PHY_HALTED state.
>
> Instead of returning -EOPNOTSUPP, call genphy_c45_config_aneg()
> (analogous to the C22 case) so that the state machine can run
> correctly.
>
> genphy_c45_config_aneg() closely resembles mv3310_config_aneg()
> in drivers/net/phy/marvell10g.c, excluding vendor specific
> configurations for 1000BaseT.
>
> Fixes: 22b56e827093 ("net: phy: replace genphy_10g_driver with genphy_c45_driver")
>
> Signed-off-by: Marco Hartmann <marco.hartmann@nxp.com>
> ---
> Changes in v2:
> - corrected commit message
> - reordered variables

Applied to net-next.

\
 
 \ /
  Last update: 2019-08-28 05:21    [W:0.162 / U:0.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site