lkml.org 
[lkml]   [2019]   [Aug]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] arm64: dts: imx8mn: Add gpio-ranges property
Date
From: Anson Huang <Anson.Huang@nxp.com>

Add "gpio-ranges" property to establish connections between GPIOs
and PINs on i.MX8MN pinctrl driver.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
arch/arm64/boot/dts/freescale/imx8mn.dtsi | 5 +++++
1 file changed, 5 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
index f5eff35..1d8899b 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
@@ -173,6 +173,7 @@
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
+ gpio-ranges = <&iomuxc 0 10 30>;
};

gpio2: gpio@30210000 {
@@ -185,6 +186,7 @@
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
+ gpio-ranges = <&iomuxc 0 40 21>;
};

gpio3: gpio@30220000 {
@@ -197,6 +199,7 @@
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
+ gpio-ranges = <&iomuxc 0 61 26>;
};

gpio4: gpio@30230000 {
@@ -209,6 +212,7 @@
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
+ gpio-ranges = <&iomuxc 21 108 11>;
};

gpio5: gpio@30240000 {
@@ -221,6 +225,7 @@
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
+ gpio-ranges = <&iomuxc 0 119 30>;
};

wdog1: watchdog@30280000 {
--
2.7.4
\
 
 \ /
  Last update: 2019-08-15 05:23    [W:0.031 / U:4.072 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site