lkml.org 
[lkml]   [2019]   [Aug]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v8 14/21] clk: tegra210: Add suspend and resume support
From
Date
12.08.2019 20:28, Sowjanya Komatineni пишет:
>
> On 8/12/19 9:25 AM, Dmitry Osipenko wrote:
>> 11.08.2019 22:15, Sowjanya Komatineni пишет:
>>> On 8/11/19 10:39 AM, Dmitry Osipenko wrote:
>>>> 09.08.2019 21:40, Sowjanya Komatineni пишет:
>>>>> On 8/9/19 11:18 AM, Dmitry Osipenko wrote:
>>>>>> 09.08.2019 19:19, Sowjanya Komatineni пишет:
>>>>>>> On 8/9/19 6:56 AM, Dmitry Osipenko wrote:
>>>>>>>> 09.08.2019 2:46, Sowjanya Komatineni пишет:
>>>>>>>>> This patch adds support for clk: tegra210: suspend-resume.
>>>>>>>>>
>>>>>>>>> All the CAR controller settings are lost on suspend when core
>>>>>>>>> power goes off.
>>>>>>>>>
>>>>>>>>> This patch has implementation for saving and restoring all PLLs
>>>>>>>>> and clocks context during system suspend and resume to have the
>>>>>>>>> clocks back to same state for normal operation.
>>>>>>>>>
>>>>>>>>> Clock driver suspend and resume are registered as syscore_ops as clocks
>>>>>>>>> restore need to happen before the other drivers resume to have all their
>>>>>>>>> clocks back to the same state as before suspend.
>>>>>>>>>
>>>>>>>>> Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
>>>>>>>>> ---
>>>>>>>>>     drivers/clk/tegra/clk-tegra210.c | 103 +++++++++++++++++++++++++++++++++++++--
>>>>>>>>>     drivers/clk/tegra/clk.c          |  64 ++++++++++++++++++++++++
>>>>>>>>>     drivers/clk/tegra/clk.h          |   3 ++
>>>>>>>>>     3 files changed, 166 insertions(+), 4 deletions(-)
>>>>>>>>>
>>>>>>>>> diff --git a/drivers/clk/tegra/clk-tegra210.c b/drivers/clk/tegra/clk-tegra210.c
>>>>>>>>> index 998bf60b219a..8dd6f4f4debb 100644
>>>>>>>>> --- a/drivers/clk/tegra/clk-tegra210.c
>>>>>>>>> +++ b/drivers/clk/tegra/clk-tegra210.c
>>>>>>>>> @@ -9,13 +9,13 @@
>>>>>>>>>     #include <linux/clkdev.h>
>>>>>>>>>     #include <linux/of.h>
>>>>>>>>>     #include <linux/of_address.h>
>>>>>>>>> +#include <linux/syscore_ops.h>
>>>>>>>>>     #include <linux/delay.h>
>>>>>>>>>     #include <linux/export.h>
>>>>>>>>>     #include <linux/mutex.h>
>>>>>>>>>     #include <linux/clk/tegra.h>
>>>>>>>>>     #include <dt-bindings/clock/tegra210-car.h>
>>>>>>>>>     #include <dt-bindings/reset/tegra210-car.h>
>>>>>>>>> -#include <linux/iopoll.h>
>>>>>>>>>     #include <linux/sizes.h>
>>>>>>>>>     #include <soc/tegra/pmc.h>
>>>>>>>>>     @@ -220,11 +220,15 @@
>>>>>>>>>     #define CLK_M_DIVISOR_SHIFT 2
>>>>>>>>>     #define CLK_M_DIVISOR_MASK 0x3
>>>>>>>>>     +#define CLK_MASK_ARM    0x44
>>>>>>>>> +#define MISC_CLK_ENB    0x48
>>>>>>>>> +
>>>>>>>>>     #define RST_DFLL_DVCO 0x2f4
>>>>>>>>>     #define DVFS_DFLL_RESET_SHIFT 0
>>>>>>>>>       #define CLK_RST_CONTROLLER_RST_DEV_Y_SET 0x2a8
>>>>>>>>>     #define CLK_RST_CONTROLLER_RST_DEV_Y_CLR 0x2ac
>>>>>>>>> +#define CPU_SOFTRST_CTRL 0x380
>>>>>>>>>       #define LVL2_CLK_GATE_OVRA 0xf8
>>>>>>>>>     #define LVL2_CLK_GATE_OVRC 0x3a0
>>>>>>>>> @@ -2825,6 +2829,7 @@ static int tegra210_enable_pllu(void)
>>>>>>>>>         struct tegra_clk_pll_freq_table *fentry;
>>>>>>>>>         struct tegra_clk_pll pllu;
>>>>>>>>>         u32 reg;
>>>>>>>>> +    int ret;
>>>>>>>>>           for (fentry = pll_u_freq_table; fentry->input_rate; fentry++) {
>>>>>>>>>             if (fentry->input_rate == pll_ref_freq)
>>>>>>>>> @@ -2853,9 +2858,14 @@ static int tegra210_enable_pllu(void)
>>>>>>>>>         reg |= PLL_ENABLE;
>>>>>>>>>         writel(reg, clk_base + PLLU_BASE);
>>>>>>>>>     -    readl_relaxed_poll_timeout_atomic(clk_base + PLLU_BASE, reg,
>>>>>>>>> -                      reg & PLL_BASE_LOCK, 2, 1000);
>>>>>>>>> -    if (!(reg & PLL_BASE_LOCK)) {
>>>>>>>>> +    /*
>>>>>>>>> +     * During clocks resume, same PLLU init and enable sequence get
>>>>>>>>> +     * executed. So, readx_poll_timeout_atomic can't be used here as it
>>>>>>>>> +     * uses ktime_get() and timekeeping resume doesn't happen by that
>>>>>>>>> +     * time. So, using tegra210_wait_for_mask for PLL LOCK.
>>>>>>>>> +     */
>>>>>>>>> +    ret = tegra210_wait_for_mask(&pllu, PLLU_BASE, PLL_BASE_LOCK);
>>>>>>>>> +    if (ret) {
>>>>>>>>>             pr_err("Timed out waiting for PLL_U to lock\n");
>>>>>>>>>             return -ETIMEDOUT;
>>>>>>>>>         }
>>>>>>>>> @@ -3288,6 +3298,84 @@ static void tegra210_disable_cpu_clock(u32 cpu)
>>>>>>>>>     }
>>>>>>>>>       #ifdef CONFIG_PM_SLEEP
>>>>>>>>> +/*
>>>>>>>>> + * This array lists mask values for each peripheral clk bank
>>>>>>>>> + * to mask out reserved bits during the clocks state restore
>>>>>>>>> + * on SC7 resume to prevent accidental writes to these reserved
>>>>>>>>> + * bits.
>>>>>>>>> + */
>>>>>>>>> +static u32 periph_clk_rsvd_mask[TEGRA210_CAR_BANK_COUNT] = {
>>>>>>>> Should be more natural to have a "valid_mask" instead of "rsvd_mask".
>>>>>>>>
>>>>>>>> What's actually wrong with touching of the reserved bits? They must be NO-OP.. or the
>>>>>>>> reserved bits are actually some kind of "secret" bits? If those bits have some use-case
>>>>>>>> outside of Silicon HW (like FPGA simulation), then this doesn't matter for upstream
>>>>>>>> and you
>>>>>>>> have to keep the workaround locally in the downstream kernel or whatever.
>>>>>>> Will rename as valid_mask.
>>>>>>>
>>>>>>> some bits in these registers are undefined and is not good to write to these bits as
>>>>>>> they
>>>>>>> can cause pslverr.
>>>>>> Okay, it should be explained in the comment.
>>>>>>
>>>>>> Is it possible to disable trapping of changing the undefined bits?
>>>>> No its internal to design
>>>> Okay.
>>>>
>>>> Also, what about to move the valid_mask into struct tegra_clk_periph_regs?
>>> No, we cannot move to tegra_clk_periph_regs as its in tegra/clk.c and is common for all
>>> tegra.
>>>
>>> Reserved bits are different on tegra chips so should come from Tegra chip specific clock
>>> driver like
>>>
>>> clk-tegra210 for Tegra210.
>> Could you please check whether the reserved bits are RAZ (read as zero)?
>>
>> [snip]
>
> yes all reserved bits of clk_enb register is 0. This should not be set to 1.
>
> As I will be changing to variable name to valid_mask instead of reserved mask, will also
> change values to valid mask so it can be used directly to write to clk_enb for enabling all
> peripherals clks.
>

It looks to me that the tegra_clk_periph_force_on() could be made local to the
clk-tegra210.c and then the raw clk_enb values could be written directly instead of having
the clk_enb[] array, probably that will be a bit cleaner.

\
 
 \ /
  Last update: 2019-08-12 20:20    [W:0.142 / U:0.572 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site