lkml.org 
[lkml]   [2019]   [Aug]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v8 14/21] clk: tegra210: Add suspend and resume support
From
Date
11.08.2019 22:15, Sowjanya Komatineni пишет:
>
> On 8/11/19 10:39 AM, Dmitry Osipenko wrote:
>> 09.08.2019 21:40, Sowjanya Komatineni пишет:
>>> On 8/9/19 11:18 AM, Dmitry Osipenko wrote:
>>>> 09.08.2019 19:19, Sowjanya Komatineni пишет:
>>>>> On 8/9/19 6:56 AM, Dmitry Osipenko wrote:
>>>>>> 09.08.2019 2:46, Sowjanya Komatineni пишет:
>>>>>>> This patch adds support for clk: tegra210: suspend-resume.
>>>>>>>
>>>>>>> All the CAR controller settings are lost on suspend when core
>>>>>>> power goes off.
>>>>>>>
>>>>>>> This patch has implementation for saving and restoring all PLLs
>>>>>>> and clocks context during system suspend and resume to have the
>>>>>>> clocks back to same state for normal operation.
>>>>>>>
>>>>>>> Clock driver suspend and resume are registered as syscore_ops as clocks
>>>>>>> restore need to happen before the other drivers resume to have all their
>>>>>>> clocks back to the same state as before suspend.
>>>>>>>
>>>>>>> Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
>>>>>>> ---
>>>>>>>    drivers/clk/tegra/clk-tegra210.c | 103 +++++++++++++++++++++++++++++++++++++--
>>>>>>>    drivers/clk/tegra/clk.c          |  64 ++++++++++++++++++++++++
>>>>>>>    drivers/clk/tegra/clk.h          |   3 ++
>>>>>>>    3 files changed, 166 insertions(+), 4 deletions(-)
>>>>>>>
>>>>>>> diff --git a/drivers/clk/tegra/clk-tegra210.c b/drivers/clk/tegra/clk-tegra210.c
>>>>>>> index 998bf60b219a..8dd6f4f4debb 100644
>>>>>>> --- a/drivers/clk/tegra/clk-tegra210.c
>>>>>>> +++ b/drivers/clk/tegra/clk-tegra210.c
>>>>>>> @@ -9,13 +9,13 @@
>>>>>>>    #include <linux/clkdev.h>
>>>>>>>    #include <linux/of.h>
>>>>>>>    #include <linux/of_address.h>
>>>>>>> +#include <linux/syscore_ops.h>
>>>>>>>    #include <linux/delay.h>
>>>>>>>    #include <linux/export.h>
>>>>>>>    #include <linux/mutex.h>
>>>>>>>    #include <linux/clk/tegra.h>
>>>>>>>    #include <dt-bindings/clock/tegra210-car.h>
>>>>>>>    #include <dt-bindings/reset/tegra210-car.h>
>>>>>>> -#include <linux/iopoll.h>
>>>>>>>    #include <linux/sizes.h>
>>>>>>>    #include <soc/tegra/pmc.h>
>>>>>>>    @@ -220,11 +220,15 @@
>>>>>>>    #define CLK_M_DIVISOR_SHIFT 2
>>>>>>>    #define CLK_M_DIVISOR_MASK 0x3
>>>>>>>    +#define CLK_MASK_ARM    0x44
>>>>>>> +#define MISC_CLK_ENB    0x48
>>>>>>> +
>>>>>>>    #define RST_DFLL_DVCO 0x2f4
>>>>>>>    #define DVFS_DFLL_RESET_SHIFT 0
>>>>>>>      #define CLK_RST_CONTROLLER_RST_DEV_Y_SET 0x2a8
>>>>>>>    #define CLK_RST_CONTROLLER_RST_DEV_Y_CLR 0x2ac
>>>>>>> +#define CPU_SOFTRST_CTRL 0x380
>>>>>>>      #define LVL2_CLK_GATE_OVRA 0xf8
>>>>>>>    #define LVL2_CLK_GATE_OVRC 0x3a0
>>>>>>> @@ -2825,6 +2829,7 @@ static int tegra210_enable_pllu(void)
>>>>>>>        struct tegra_clk_pll_freq_table *fentry;
>>>>>>>        struct tegra_clk_pll pllu;
>>>>>>>        u32 reg;
>>>>>>> +    int ret;
>>>>>>>          for (fentry = pll_u_freq_table; fentry->input_rate; fentry++) {
>>>>>>>            if (fentry->input_rate == pll_ref_freq)
>>>>>>> @@ -2853,9 +2858,14 @@ static int tegra210_enable_pllu(void)
>>>>>>>        reg |= PLL_ENABLE;
>>>>>>>        writel(reg, clk_base + PLLU_BASE);
>>>>>>>    -    readl_relaxed_poll_timeout_atomic(clk_base + PLLU_BASE, reg,
>>>>>>> -                      reg & PLL_BASE_LOCK, 2, 1000);
>>>>>>> -    if (!(reg & PLL_BASE_LOCK)) {
>>>>>>> +    /*
>>>>>>> +     * During clocks resume, same PLLU init and enable sequence get
>>>>>>> +     * executed. So, readx_poll_timeout_atomic can't be used here as it
>>>>>>> +     * uses ktime_get() and timekeeping resume doesn't happen by that
>>>>>>> +     * time. So, using tegra210_wait_for_mask for PLL LOCK.
>>>>>>> +     */
>>>>>>> +    ret = tegra210_wait_for_mask(&pllu, PLLU_BASE, PLL_BASE_LOCK);
>>>>>>> +    if (ret) {
>>>>>>>            pr_err("Timed out waiting for PLL_U to lock\n");
>>>>>>>            return -ETIMEDOUT;
>>>>>>>        }
>>>>>>> @@ -3288,6 +3298,84 @@ static void tegra210_disable_cpu_clock(u32 cpu)
>>>>>>>    }
>>>>>>>      #ifdef CONFIG_PM_SLEEP
>>>>>>> +/*
>>>>>>> + * This array lists mask values for each peripheral clk bank
>>>>>>> + * to mask out reserved bits during the clocks state restore
>>>>>>> + * on SC7 resume to prevent accidental writes to these reserved
>>>>>>> + * bits.
>>>>>>> + */
>>>>>>> +static u32 periph_clk_rsvd_mask[TEGRA210_CAR_BANK_COUNT] = {
>>>>>> Should be more natural to have a "valid_mask" instead of "rsvd_mask".
>>>>>>
>>>>>> What's actually wrong with touching of the reserved bits? They must be NO-OP.. or the
>>>>>> reserved bits are actually some kind of "secret" bits? If those bits have some use-case
>>>>>> outside of Silicon HW (like FPGA simulation), then this doesn't matter for upstream
>>>>>> and you
>>>>>> have to keep the workaround locally in the downstream kernel or whatever.
>>>>> Will rename as valid_mask.
>>>>>
>>>>> some bits in these registers are undefined and is not good to write to these bits as they
>>>>> can cause pslverr.
>>>> Okay, it should be explained in the comment.
>>>>
>>>> Is it possible to disable trapping of changing the undefined bits?
>>> No its internal to design
>> Okay.
>>
>> Also, what about to move the valid_mask into struct tegra_clk_periph_regs?
>
> No, we cannot move to tegra_clk_periph_regs as its in tegra/clk.c and is common for all tegra.
>
> Reserved bits are different on tegra chips so should come from Tegra chip specific clock
> driver like
>
> clk-tegra210 for Tegra210.

Could you please check whether the reserved bits are RAZ (read as zero)?

[snip]

\
 
 \ /
  Last update: 2019-08-12 18:27    [W:0.251 / U:0.064 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site