lkml.org 
[lkml]   [2019]   [Aug]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH 5/6] mtd: spi-nor: Add s3an_post_sfdp_fixups()
On Wed, 31 Jul 2019 09:12:16 +0000
<Tudor.Ambarus@microchip.com> wrote:

> From: Tudor Ambarus <tudor.ambarus@microchip.com>
>
> s3an_nor_scan() was overriding the opcode selection done in
> spi_nor_default_setup(). Set nor->setup() method in order to
> avoid unnecessary call to spi_nor_default_setup().
>
> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
> ---
> drivers/mtd/spi-nor/spi-nor.c | 35 +++++++++++++++++++++++++----------
> 1 file changed, 25 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
> index 0ff474e5e4f5..5fea5d7ce2cb 100644
> --- a/drivers/mtd/spi-nor/spi-nor.c
> +++ b/drivers/mtd/spi-nor/spi-nor.c
> @@ -2795,7 +2795,9 @@ static int spi_nor_check(struct spi_nor *nor)
> return 0;
> }
>
> -static int s3an_nor_scan(struct spi_nor *nor)
> +static int s3an_nor_setup(struct spi_nor *nor,
> + const struct spi_nor_flash_parameter *params,
> + const struct spi_nor_hwcaps *hwcaps)
> {
> int ret;
> u8 val;
> @@ -4393,6 +4395,11 @@ static void spansion_post_sfdp_fixups(struct spi_nor *nor)
> nor->mtd.erasesize = nor->info->sector_size;
> }
>
> +static void s3an_post_sfdp_fixups(struct spi_nor *nor)
> +{
> + nor->setup = s3an_nor_setup;
> +}
> +
> static void
> spi_nor_manufacturer_post_sfdp_fixups(struct spi_nor *nor,
> struct spi_nor_flash_parameter *params)
> @@ -4405,6 +4412,9 @@ spi_nor_manufacturer_post_sfdp_fixups(struct spi_nor *nor,
> default:
> break;
> }
> +
> + if (nor->info->flags & SPI_S3AN)
> + s3an_post_sfdp_fixups(nor);
> }
>
> static void spi_nor_post_sfdp_fixups(struct spi_nor *nor,
> @@ -4582,9 +4592,9 @@ static int spi_nor_select_erase(struct spi_nor *nor, u32 wanted_size)
> return 0;
> }
>
> -static int spi_nor_setup(struct spi_nor *nor,
> - const struct spi_nor_flash_parameter *params,
> - const struct spi_nor_hwcaps *hwcaps)
> +static int spi_nor_default_setup(struct spi_nor *nor,
> + const struct spi_nor_flash_parameter *params,
> + const struct spi_nor_hwcaps *hwcaps)
> {
> u32 ignored_mask, shared_mask;
> int err;
> @@ -4641,6 +4651,16 @@ static int spi_nor_setup(struct spi_nor *nor,
> return err;
> }
>
> +static int spi_nor_setup(struct spi_nor *nor,
> + const struct spi_nor_flash_parameter *params,
> + const struct spi_nor_hwcaps *hwcaps)
> +{
> + if (!nor->setup)
> + return 0;
> +
> + return nor->setup(nor, params, hwcaps);
> +}
> +
> static int spi_nor_disable_write_protection(struct spi_nor *nor)
> {
> if (!nor->disable_write_protection)
> @@ -4804,6 +4824,7 @@ int spi_nor_scan(struct spi_nor *nor, const char *name,
> /* Kept only for backward compatibility purpose. */
> nor->quad_enable = spansion_quad_enable;
> nor->set_4byte = spansion_set_4byte;
> + nor->setup = spi_nor_default_setup;
>
> /* Default locking operations. */
> if (info->flags & SPI_NOR_HAS_LOCK) {
> @@ -4905,12 +4926,6 @@ int spi_nor_scan(struct spi_nor *nor, const char *name,
> return -EINVAL;
> }
>
> - if (info->flags & SPI_S3AN) {
> - ret = s3an_nor_scan(nor);
> - if (ret)
> - return ret;
> - }
> -
> /* Send all the required SPI flash commands to initialize device */
> ret = spi_nor_init(nor);
> if (ret)

Almost all of this (except the s3an specific bits) should be done in
the previous patch. So I'll put a condition on the R-b I placed on patch
4: some of this code should be moved there.

\
 
 \ /
  Last update: 2019-08-01 08:43    [W:0.158 / U:2.236 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site