lkml.org 
[lkml]   [2019]   [Jul]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/2] dt-bindings: leds: document new "power-supply" property
On Thu, Jul 25, 2019 at 01:08:46PM +0200, Jean-Jacques Hiblot wrote:
> Hi Rob,
>
> On 24/07/2019 18:47, Rob Herring wrote:
> > On Mon, Jul 08, 2019 at 12:35:47PM +0200, Jean-Jacques Hiblot wrote:
> > > Most of the LEDs are powered by a voltage/current regulator. describing in
> > > the device-tree makes it possible for the LED core to enable/disable it
> > > when needed.
> > >
> > > Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
> > > ---
> > > Documentation/devicetree/bindings/leds/common.txt | 5 +++++
> > > 1 file changed, 5 insertions(+)
> > >
> > > diff --git a/Documentation/devicetree/bindings/leds/common.txt b/Documentation/devicetree/bindings/leds/common.txt
> > > index 70876ac11367..e093a2b7eb90 100644
> > > --- a/Documentation/devicetree/bindings/leds/common.txt
> > > +++ b/Documentation/devicetree/bindings/leds/common.txt
> > > @@ -61,6 +61,11 @@ Optional properties for child nodes:
> > > - panic-indicator : This property specifies that the LED should be used,
> > > if at all possible, as a panic indicator.
> > > +- power-supply : A voltage/current regulator used to to power the LED. When a
> > > + LED is turned off, the LED core disable its regulator. The
> > > + same regulator can power many LED (or other) devices. It is
> > > + turned off only when all of its users disabled it.
> > Not sure this should be common. It wouldn't apply to cases where we have
> > an LED controller parent nor gpio and pwm LEDs and those are most cases.
>
> It does make sense for GPIO and PWM bindings if the anode of LED is tied to
> a regulated voltage and the cathod to the control line.
>
> The same is true for a certain class of true LED controller that do not
> deliver power but act like current sinks.
>
> JJ
>
> >
> > Perhaps what makes sense here is an regulator-led binding.

You didn't comment on this alternative... and I confess I'm not quite
sure what Rob means by a regulator-led binding so I can't really comment
either.

Rob, is there any analogous example for a regulator-<something-else> binding
to compare with?


Daniel.

> >
> > > +
> > > - trigger-sources : List of devices which should be used as a source triggering
> > > this LED activity. Some LEDs can be related to a specific
> > > device and should somehow indicate its state. E.g. USB 2.0
> > > --
> > > 2.17.1
> > >

\
 
 \ /
  Last update: 2019-07-26 12:07    [W:0.084 / U:0.076 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site