lkml.org 
[lkml]   [2019]   [Jul]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 2/2] dt-bindings: leds: document new "power-supply" property
From
Date
Hi Rob,

On 24/07/2019 18:47, Rob Herring wrote:
> On Mon, Jul 08, 2019 at 12:35:47PM +0200, Jean-Jacques Hiblot wrote:
>> Most of the LEDs are powered by a voltage/current regulator. describing in
>> the device-tree makes it possible for the LED core to enable/disable it
>> when needed.
>>
>> Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
>> ---
>> Documentation/devicetree/bindings/leds/common.txt | 5 +++++
>> 1 file changed, 5 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/leds/common.txt b/Documentation/devicetree/bindings/leds/common.txt
>> index 70876ac11367..e093a2b7eb90 100644
>> --- a/Documentation/devicetree/bindings/leds/common.txt
>> +++ b/Documentation/devicetree/bindings/leds/common.txt
>> @@ -61,6 +61,11 @@ Optional properties for child nodes:
>> - panic-indicator : This property specifies that the LED should be used,
>> if at all possible, as a panic indicator.
>>
>> +- power-supply : A voltage/current regulator used to to power the LED. When a
>> + LED is turned off, the LED core disable its regulator. The
>> + same regulator can power many LED (or other) devices. It is
>> + turned off only when all of its users disabled it.
> Not sure this should be common. It wouldn't apply to cases where we have
> an LED controller parent nor gpio and pwm LEDs and those are most cases.

It does make sense for GPIO and PWM bindings if the anode of LED is tied
to a regulated voltage and the cathod to the control line.

The same is true for a certain class of true LED controller that do not
deliver power but act like current sinks.

JJ

>
> Perhaps what makes sense here is an regulator-led binding.
>
>> +
>> - trigger-sources : List of devices which should be used as a source triggering
>> this LED activity. Some LEDs can be related to a specific
>> device and should somehow indicate its state. E.g. USB 2.0
>> --
>> 2.17.1
>>

\
 
 \ /
  Last update: 2019-07-25 13:11    [W:0.168 / U:1.320 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site