lkml.org 
[lkml]   [2019]   [Jul]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v3 0/5] iio: imu: st_lsm6dsx: Add support for LSM9DS1
Date
Resend 2 of Lorenzo's patches that this builds upon. They have been previously
posted to linux-iio only:
https://lore.kernel.org/linux-iio/cover.1563226641.git.lorenzo@kernel.org/

Then, add support for the LSM9DS1 accel/gyro unit in 3 simple steps. This
is also only a resend and rebase of the v2:
https://lore.kernel.org/linux-iio/20190716093325.7683-1-martin.kepplinger@puri.sm/

So I call this v3 and Lorenzo, I hope that it's fine for you that I just
take your patches here - also since they mention to be intended for supporting
the device.


revision history
----------------
v3: rebase and add Lorenzo's patches in order to apply to the iio testing brach
v2: further simplifications based on Lorenzo's feedback
v1: initial change for adding lsm9ds1 support




Lorenzo Bianconi (2):
iio: imu: st_lsm6dsx: move odr_table in st_lsm6dsx_sensor_settings
iio: imu: st_lsm6dsx: move fs_table in st_lsm6dsx_sensor_settings

Martin Kepplinger (3):
iio: imu: st_lsm6sdx: move register definitions to sensor_settings
struct
iio: imu: st_lsm6dsx: add support for accel/gyro unit of lsm9sd1
dt-bindings: iio: imu: st_lsm6dsx: add lsm9ds1 device bindings

.../bindings/iio/imu/st_lsm6dsx.txt | 1 +
drivers/iio/imu/st_lsm6dsx/Kconfig | 1 +
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h | 12 +
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 490 +++++++++++++++---
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c | 5 +
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c | 5 +
6 files changed, 440 insertions(+), 74 deletions(-)

--
2.20.1

\
 
 \ /
  Last update: 2019-07-25 07:35    [W:0.109 / U:2.116 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site