Messages in this thread | | | Date | Wed, 24 Jul 2019 16:22:09 -0700 | From | Nicolin Chen <> | Subject | Re: [PATCH 08/10] ASoC: dt-bindings: Document fcomb_mode property |
| |
On Mon, Jul 22, 2019 at 03:48:31PM +0300, Daniel Baluta wrote: > This allows combining multiple-data-line FIFOs into a > single-data-line FIFO. > > Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com> > --- > Documentation/devicetree/bindings/sound/fsl-sai.txt | 4 ++++
This should be sent to devicetree mail-list also.
> 1 file changed, 4 insertions(+) > > diff --git a/Documentation/devicetree/bindings/sound/fsl-sai.txt b/Documentation/devicetree/bindings/sound/fsl-sai.txt > index 59f4d965a5fb..ca27afd840ba 100644 > --- a/Documentation/devicetree/bindings/sound/fsl-sai.txt > +++ b/Documentation/devicetree/bindings/sound/fsl-sai.txt > @@ -54,6 +54,10 @@ Optional properties: > represents first data line, bit 1 represents second > data line and so on. Data line is enabled if > corresponding bit is set to 1. > + - fsl,fcomb_mode : list of two integers (first for RX, second for TX) > + representing FIFO combine mode. Possible values for > + combined mode are: 0 - disabled, 1 - Rx/Tx from shift > + registers, 2 - Rx/Tx by software, 3 - both.
Looks like a software configuration to me, instead of a device property. Is this configurable by user case, or hard-coded by SoC/hardware design?
| |