lkml.org 
[lkml]   [2019]   [Jul]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] ASoC: max98383: fix i2c probe failure
Date
From: fengchunguo <chunguo.feng@amlogic.com>

Added reset_gpio configuration for i2c probe successfully.
If not,i2c address can't be found rightly.

Error information:
max98373 3-0031: Failed to read: 0x21FF

Fixed:
[3.761299@3] max98373 3-0031: MAX98373 revisionID: 0x43
[3.828911@3] asoc-aml-card auge_sound: max98373-aif1 <-> TDM-B mapping ok

Signed-off-by: fengchunguo <chunguo.feng@amlogic.com>
---
sound/soc/codecs/max98373.c | 34 ++++++++++++++++++++++++++++++----
sound/soc/codecs/max98373.h | 1 +
2 files changed, 31 insertions(+), 4 deletions(-)

diff --git a/sound/soc/codecs/max98373.c b/sound/soc/codecs/max98373.c
index 528695cd6a1c..9a1eb7222357 100644
--- a/sound/soc/codecs/max98373.c
+++ b/sound/soc/codecs/max98373.c
@@ -12,6 +12,7 @@
#include <sound/pcm_params.h>
#include <sound/soc.h>
#include <linux/gpio.h>
+#include <linux/of.h>
#include <linux/of_gpio.h>
#include <sound/tlv.h>
#include "max98373.h"
@@ -895,6 +896,17 @@ static void max98373_slot_config(struct i2c_client *i2c,
else
max98373->i_slot = 1;

+ max98373->reset_gpio = of_get_named_gpio(dev->of_node,
+ "maxim,reset-gpio", 0);
+ if (!gpio_is_valid(max98373->reset_gpio)) {
+ dev_err(dev, "Looking up %s property in node %s failed %d\n",
+ "maxim,reset-gpio", dev->of_node->full_name,
+ max98373->reset_gpio);
+ } else {
+ dev_dbg(dev, "maxim,reset-gpio=%d",
+ max98373->reset_gpio);
+ }
+
if (!device_property_read_u32(dev, "maxim,spkfb-slot-no", &value))
max98373->spkfb_slot = value & 0xF;
else
@@ -923,7 +935,6 @@ static int max98373_i2c_probe(struct i2c_client *i2c,
else
max98373->interleave_mode = false;

-
/* regmap initialization */
max98373->regmap
= devm_regmap_init_i2c(i2c, &max98373_regmap);
@@ -934,6 +945,24 @@ static int max98373_i2c_probe(struct i2c_client *i2c,
return ret;
}

+ /* voltage/current slot & gpio configuration */
+ max98373_slot_config(i2c, max98373);
+
+ /* Power on device */
+ if (gpio_is_valid(max98373->reset_gpio)) {
+ ret = gpio_request(max98373->reset_gpio, "MAX98373_RESET");
+ if (ret) {
+ dev_err(&i2c->dev, "%s: Failed to request gpio %d\n",
+ __func__, max98373->reset_gpio);
+ gpio_free(max98373->reset_gpio);
+ return -EINVAL;
+ }
+ gpio_direction_output(max98373->reset_gpio, 0);
+ msleep(50);
+ gpio_direction_output(max98373->reset_gpio, 1);
+ msleep(20);
+ }
+
/* Check Revision ID */
ret = regmap_read(max98373->regmap,
MAX98373_R21FF_REV_ID, &reg);
@@ -944,9 +973,6 @@ static int max98373_i2c_probe(struct i2c_client *i2c,
}
dev_info(&i2c->dev, "MAX98373 revisionID: 0x%02X\n", reg);

- /* voltage/current slot configuration */
- max98373_slot_config(i2c, max98373);
-
/* codec registeration */
ret = devm_snd_soc_register_component(&i2c->dev, &soc_codec_dev_max98373,
max98373_dai, ARRAY_SIZE(max98373_dai));
diff --git a/sound/soc/codecs/max98373.h b/sound/soc/codecs/max98373.h
index f6a37aa02f26..533d2053f608 100644
--- a/sound/soc/codecs/max98373.h
+++ b/sound/soc/codecs/max98373.h
@@ -203,6 +203,7 @@

struct max98373_priv {
struct regmap *regmap;
+ int reset_gpio;
unsigned int v_slot;
unsigned int i_slot;
unsigned int spkfb_slot;
--
2.18.0
\
 
 \ /
  Last update: 2019-07-15 12:11    [W:0.027 / U:0.988 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site