lkml.org 
[lkml]   [2019]   [Jun]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 5/5] dt-bindings: drm/panel: simple: add sharp,lq070y3dg3b panel
Date
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
---
.../bindings/display/panel/sharp,lq070y3dg3b.txt | 12 ++++++++++++
1 file changed, 12 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/panel/sharp,lq070y3dg3b.txt

diff --git a/Documentation/devicetree/bindings/display/panel/sharp,lq070y3dg3b.txt b/Documentation/devicetree/bindings/display/panel/sharp,lq070y3dg3b.txt
new file mode 100644
index 000000000000..95534b55ee5f
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/sharp,lq070y3dg3b.txt
@@ -0,0 +1,12 @@
+Sharp LQ070Y3DG3B 7.0" WVGA landscape TFT LCD panel
+
+Required properties:
+- compatible: should be "sharp,lq070y3dg3b"
+
+Optional properties:
+- enable-gpios: GPIO pin to enable or disable the panel
+- backlight: phandle of the backlight device attached to the panel
+- power-supply: phandle of the regulator that provides the supply voltage
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
--
2.19.1
\
 
 \ /
  Last update: 2019-06-07 13:12    [W:0.160 / U:0.232 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site