Messages in this thread | | | Date | Tue, 25 Jun 2019 22:41:40 +0200 | From | Sam Ravnborg <> | Subject | Re: [PATCH v3 5/5] dt-bindings: drm/panel: simple: add sharp, lq070y3dg3b panel |
| |
On Fri, Jun 07, 2019 at 01:11:11PM +0200, H. Nikolaus Schaller wrote: > Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> > --- > .../bindings/display/panel/sharp,lq070y3dg3b.txt | 12 ++++++++++++ > 1 file changed, 12 insertions(+) > create mode 100644 Documentation/devicetree/bindings/display/panel/sharp,lq070y3dg3b.txt > > diff --git a/Documentation/devicetree/bindings/display/panel/sharp,lq070y3dg3b.txt b/Documentation/devicetree/bindings/display/panel/sharp,lq070y3dg3b.txt > new file mode 100644 > index 000000000000..95534b55ee5f > --- /dev/null > +++ b/Documentation/devicetree/bindings/display/panel/sharp,lq070y3dg3b.txt > @@ -0,0 +1,12 @@ > +Sharp LQ070Y3DG3B 7.0" WVGA landscape TFT LCD panel > + > +Required properties: > +- compatible: should be "sharp,lq070y3dg3b" > + > +Optional properties: > +- enable-gpios: GPIO pin to enable or disable the panel > +- backlight: phandle of the backlight device attached to the panel > +- power-supply: phandle of the regulator that provides the supply voltage > + > +This binding is compatible with the simple-panel binding, which is specified > +in simple-panel.txt in this directory. > -- > 2.19.1 > > _______________________________________________ > dri-devel mailing list > dri-devel@lists.freedesktop.org > https://lists.freedesktop.org/mailman/listinfo/dri-devel
| |