lkml.org 
[lkml]   [2019]   [Jun]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 1/2] Input: edt-ft5x06 - use get_unaligned_be16()
On Tue, Jun 25, 2019 at 11:44 AM David Laight <David.Laight@aculab.com> wrote:
>
> From: Dmitry Torokhov
> > Sent: 23 June 2019 07:32
> >
> > Instead of doing conversion by hand, let's use the proper accessors.
> >
> > Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
> > ---
> > drivers/input/touchscreen/edt-ft5x06.c | 5 +++--
> > 1 file changed, 3 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/input/touchscreen/edt-ft5x06.c b/drivers/input/touchscreen/edt-ft5x06.c
> > index c639ebce914c..ec770226e119 100644
> > --- a/drivers/input/touchscreen/edt-ft5x06.c
> > +++ b/drivers/input/touchscreen/edt-ft5x06.c
> > @@ -27,6 +27,7 @@
> > #include <linux/gpio/consumer.h>
> > #include <linux/input/mt.h>
> > #include <linux/input/touchscreen.h>
> > +#include <asm/unaligned.h>
> >
> > #define WORK_REGISTER_THRESHOLD 0x00
> > #define WORK_REGISTER_REPORT_RATE 0x08
> > @@ -239,8 +240,8 @@ static irqreturn_t edt_ft5x06_ts_isr(int irq, void *dev_id)
> > if (tsdata->version == EDT_M06 && type == TOUCH_EVENT_DOWN)
> > continue;
> >
> > - x = ((buf[0] << 8) | buf[1]) & 0x0fff;
> > - y = ((buf[2] << 8) | buf[3]) & 0x0fff;
> > + x = get_unaligned_be16(buf) & 0x0fff;
> > + y = get_unaligned_be16(buf + 2) & 0x0fff;
>
> You might as well delete the pointless masking with 0xff.

Hmm... Does it guarantee the most significant nibble to be always 0?
(Note 16-bit value and three f:s in the mask)


--
With Best Regards,
Andy Shevchenko

\
 
 \ /
  Last update: 2019-06-25 12:51    [W:1.040 / U:0.004 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site