lkml.org 
[lkml]   [2019]   [Jun]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 0/9] Multicolor Framework update
Hi!

> Am Donnerstag, 23. Mai 2019, 14:08:11 CEST schrieb Dan Murphy:
> > leds: multicolor: Add sysfs interface definition
> > dt: bindings: Add multicolor class dt bindings documention
> > documention: leds: Add multicolor class documentation
> > dt-bindings: leds: Add multicolor ID to the color ID list
> > leds: Add multicolor ID to the color ID list
> > leds: multicolor: Introduce a multicolor class definition
> > dt: bindings: lp50xx: Introduce the lp50xx family of RGB drivers
> > leds: lp50xx: Add the LP50XX family of the RGB LED driver
> > leds: Update the lp55xx to use the multi color framework
>
> While not having much experience with the implementation of the LED subsystem,
> I've had a short look at those. Curious question: would it be possible to take
> three gpio-leds and group those together to one multicolor-led? I know at
> least one board, where things are wired up like this, see e.g.
> at91-sama5d27_som1_ek.dts

Probably could be done, but is not really a good match. Multicolor was meant for
LEDs with many brightness levels.

Pavel
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

\
 
 \ /
  Last update: 2019-06-16 17:50    [W:0.211 / U:4.464 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site