lkml.org 
[lkml]   [2019]   [Jun]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v3 0/9] Multicolor Framework update
From
Date
Hello

On 6/14/19 2:02 AM, Alexander Dahl wrote:
> Hello Dan,
>
> Am Donnerstag, 23. Mai 2019, 14:08:11 CEST schrieb Dan Murphy:
>> leds: multicolor: Add sysfs interface definition
>> dt: bindings: Add multicolor class dt bindings documention
>> documention: leds: Add multicolor class documentation
>> dt-bindings: leds: Add multicolor ID to the color ID list
>> leds: Add multicolor ID to the color ID list
>> leds: multicolor: Introduce a multicolor class definition
>> dt: bindings: lp50xx: Introduce the lp50xx family of RGB drivers
>> leds: lp50xx: Add the LP50XX family of the RGB LED driver
>> leds: Update the lp55xx to use the multi color framework
> While not having much experience with the implementation of the LED subsystem,
> I've had a short look at those. Curious question: would it be possible to take
> three gpio-leds and group those together to one multicolor-led? I know at
> least one board, where things are wired up like this, see e.g.
> at91-sama5d27_som1_ek.dts

I have been thinking a lot about how gpio LEDs would fit into the mix here.

The leds-gpio.c would need to be extended to register to the multicolor
framework for this to work.

I would need to get or create a gpio led cluster to test it out.

Dan


> Greets
> Alex
>

\
 
 \ /
  Last update: 2019-06-14 16:24    [W:4.582 / U:0.052 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site