lkml.org 
[lkml]   [2019]   [May]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3] arm64: dts: ls1028a: Add USB dt nodes
Date
This patch adds USB dt nodes for LS1028A.

Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
---
Changes in v3:
- Add space between label and node name.
- Add spcae with properties and '='.
- Add SoC specific compatible.

Changes in v2:
- Rename node from usb3@... to usb@... to meet DTSpec

arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 20 ++++++++++++++++++++
1 files changed, 20 insertions(+), 0 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
index 8dd3501..19519df 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
@@ -144,6 +144,26 @@
clocks = <&sysclk>;
};

+ usb0: usb@3100000 {
+ compatible = "fsl,ls1028a-dwc3", "snps,dwc3";
+ reg = <0x0 0x3100000 0x0 0x10000>;
+ interrupts = <0 80 0x4>;
+ dr_mode = "host";
+ snps,dis_rxdet_inp3_quirk;
+ snps,quirk-frame-length-adjustment = <0x20>;
+ snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
+ };
+
+ usb1: usb@3110000 {
+ compatible = "fsl,ls1028a-dwc3", "snps,dwc3";
+ reg = <0x0 0x3110000 0x0 0x10000>;
+ interrupts = <0 81 0x4>;
+ dr_mode = "host";
+ snps,dis_rxdet_inp3_quirk;
+ snps,quirk-frame-length-adjustment = <0x20>;
+ snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
+ };
+
i2c0: i2c@2000000 {
compatible = "fsl,vf610-i2c";
#address-cells = <1>;
--
1.7.1
\
 
 \ /
  Last update: 2019-05-08 08:46    [W:0.046 / U:0.084 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site