lkml.org 
[lkml]   [2019]   [May]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[RESEND PATCH v3 0/2] Enable wm8524 codec on i.MX8MM EVK
Date
This patch series introduces the SAI nodes on i.MX8MM EVK then
creates the wm8524 codec node and finally uses simple card machine
driver to create a sound card.

Changes since v2:
- place compatible strings one a single lines
- move GPIO pinctrl in a node of its own
- remove codec phandle

Changes since v1:
- use "fsl,imx8mm-sai", "fsl,imx8mq-sai" compatbile strings and
remove "fsl,imx6sx-sai" because SAI module on i.MX8M is not
compatbile with SAI modules form i.MX6

Daniel Baluta (2):
arm64: dts: imx8mm: Add SAI nodes
arm64: dts: imx8mm-evk: Enable audio codec wm8524

arch/arm64/boot/dts/freescale/imx8mm-evk.dts | 55 ++++++++++++++++
arch/arm64/boot/dts/freescale/imx8mm.dtsi | 66 ++++++++++++++++++++
2 files changed, 121 insertions(+)

--
2.17.1

\
 
 \ /
  Last update: 2019-05-08 09:11    [W:0.033 / U:1.684 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site