lkml.org 
[lkml]   [2019]   [May]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] arm64: dts: ls1028a: Fix CPU idle fail.
Date
PSCI spec define 1st parameter's bit 16 of function CPU_SUSPEND to
indicate CPU State Type: 0 for standby, 1 for power down. In this
case, we want to select standby for CPU idle feature. But current
setting wrongly select power down and cause CPU SUSPEND fail every
time. Need this fix.

Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
---
arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 18 +++++++++---------
1 files changed, 9 insertions(+), 9 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
index b045812..bf7f845 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
@@ -28,7 +28,7 @@
enable-method = "psci";
clocks = <&clockgen 1 0>;
next-level-cache = <&l2>;
- cpu-idle-states = <&CPU_PH20>;
+ cpu-idle-states = <&CPU_PW20>;
};

cpu1: cpu@1 {
@@ -38,7 +38,7 @@
enable-method = "psci";
clocks = <&clockgen 1 0>;
next-level-cache = <&l2>;
- cpu-idle-states = <&CPU_PH20>;
+ cpu-idle-states = <&CPU_PW20>;
};

l2: l2-cache {
@@ -53,13 +53,13 @@
*/
entry-method = "arm,psci";

- CPU_PH20: cpu-ph20 {
- compatible = "arm,idle-state";
- idle-state-name = "PH20";
- arm,psci-suspend-param = <0x00010000>;
- entry-latency-us = <1000>;
- exit-latency-us = <1000>;
- min-residency-us = <3000>;
+ CPU_PW20: cpu-pw20 {
+ compatible = "arm,idle-state";
+ idle-state-name = "PW20";
+ arm,psci-suspend-param = <0x0>;
+ entry-latency-us = <2000>;
+ exit-latency-us = <2000>;
+ min-residency-us = <6000>;
};
};

--
1.7.1
\
 
 \ /
  Last update: 2019-05-07 09:44    [W:0.039 / U:2.276 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site