lkml.org 
[lkml]   [2019]   [May]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] dt-bindings: thermal: Make cooling-maps property optional
Date
There may be no cooling device on system, or there are no enough
cooling devices for each thermal zone in multiple thermal zone
cases since cooling devices can't be shared.
So make this property optional to remove such limitations.

Signed-off-by: Yuantian Tang <andy.tang@nxp.com>
---
.../devicetree/bindings/thermal/thermal.txt | 4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/thermal/thermal.txt b/Documentation/devicetree/bindings/thermal/thermal.txt
index ca14ba9..694e834 100644
--- a/Documentation/devicetree/bindings/thermal/thermal.txt
+++ b/Documentation/devicetree/bindings/thermal/thermal.txt
@@ -142,11 +142,11 @@ Required properties:
- trips: A sub-node which is a container of only trip point nodes
Type: sub-node required to describe the thermal zone.

+
+Optional property:
- cooling-maps: A sub-node which is a container of only cooling device
Type: sub-node map nodes, used to describe the relation between trips
and cooling devices.
-
-Optional property:
- coefficients: An array of integers (one signed cell) containing
Type: array coefficients to compose a linear relation between
Elem size: one cell the sensors listed in the thermal-sensors property.
--
1.7.1
\
 
 \ /
  Last update: 2019-05-15 11:44    [W:0.098 / U:0.464 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site