lkml.org 
[lkml]   [2019]   [Apr]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v3 0/3] ARM: da850: enable cpufreq in DT mode
Date
From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

This series adds cpufreq-dt operating points for da850 boards supported
with device tree (da850-lcdk, da850-lego-ev3, da850-evm).

Last patch enables CPUFREQ_DT in davinci_all_defconfig.

v1 -> v2:
- use the VDCDC3_1.2V regulator as cpu-supply on da850-evm

v2 -> v3:
- drop patch 1, as the revision tag is in fact correctly passed to the kernel
by u-boot
- only enable the 375 operating point for da850-evm as this is the standard
frequency for this board

Bartosz Golaszewski (1):
ARM: dts: da850-evm: enable cpufreq

David Lechner (2):
ARM: dts: da850: add cpu node and operating points to DT
ARM: davinci_all_defconfig: Enable CPUFREQ_DT

arch/arm/boot/dts/da850-evm.dts | 13 ++++++
arch/arm/boot/dts/da850-lcdk.dts | 31 ++++++++++++++
arch/arm/boot/dts/da850-lego-ev3.dts | 30 ++++++++++++++
arch/arm/boot/dts/da850.dtsi | 56 ++++++++++++++++++++++++++
arch/arm/configs/davinci_all_defconfig | 1 +
5 files changed, 131 insertions(+)

--
2.21.0

\
 
 \ /
  Last update: 2019-04-08 10:00    [W:2.864 / U:0.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site