lkml.org 
[lkml]   [2019]   [Apr]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 2/2] media:st-mipid02: MIPID02 CSI-2 to PARALLEL bridge driver
On Tue, Mar 26, 2019 at 02:36:41PM +0000, Mickael GUENE wrote:
> Sakari,
>
> >> +static int bpp_from_code(__u32 code)
> >> +{
> >> + switch (code) {
> >> + case MEDIA_BUS_FMT_SBGGR8_1X8:
> >> + case MEDIA_BUS_FMT_SGBRG8_1X8:
> >> + case MEDIA_BUS_FMT_SGRBG8_1X8:
> >> + case MEDIA_BUS_FMT_SRGGB8_1X8:
> >> + return 8;
> >> + case MEDIA_BUS_FMT_SBGGR10_1X10:
> >> + case MEDIA_BUS_FMT_SGBRG10_1X10:
> >> + case MEDIA_BUS_FMT_SGRBG10_1X10:
> >> + case MEDIA_BUS_FMT_SRGGB10_1X10:
> >> + return 10;
> >> + case MEDIA_BUS_FMT_SBGGR12_1X12:
> >> + case MEDIA_BUS_FMT_SGBRG12_1X12:
> >> + case MEDIA_BUS_FMT_SGRBG12_1X12:
> >> + case MEDIA_BUS_FMT_SRGGB12_1X12:
> >> + return 12;
> >> + case MEDIA_BUS_FMT_UYVY8_2X8:
> >
> > This is good for the parallel bus, but on CSI-2 side you should have
> > MEDIA_BUS_FMT_UYVY8_1X16 instead. This isn't technically correct for a
> > serial bus, but the custom is to use the one sample / pixel formats on the
> > serial busses.
> >
> Should MEDIA_BUS_FMT_BGR888_1X24 be something like
> MEDIA_BUS_FMT_BGR888_3X8 for parallel output bus ?

Good point. Yes.

Could you add that format to
Documentation/media/uapi/v4l/subdev-formats.rst, please, in a separate
patch?

--
Regards,

Sakari Ailus
sakari.ailus@linux.intel.com

\
 
 \ /
  Last update: 2019-04-06 13:02    [W:0.381 / U:0.220 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site