lkml.org 
[lkml]   [2019]   [Mar]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 2/2] media:st-mipid02: MIPID02 CSI-2 to PARALLEL bridge driver
On Tue, Mar 26, 2019 at 02:12:52PM +0000, Mickael GUENE wrote:
> Sakari,
>
> On 3/26/19 14:54, Sakari Ailus wrote:
> > Hi Mickael,
> >
> > On Tue, Mar 26, 2019 at 12:57:03PM +0000, Mickael GUENE wrote:
> > ...
> >>>> +static int mipid02_set_fmt(struct v4l2_subdev *sd,
> >>>> + struct v4l2_subdev_pad_config *cfg,
> >>>> + struct v4l2_subdev_format *format)
> >>>> +{
> >>>> + struct v4l2_mbus_framefmt *mbus_fmt = &format->format;
> >>>> + struct mipid02_dev *bridge = to_mipid02_dev(sd);
> >>>> + struct i2c_client *client = bridge->i2c_client;
> >>>> + struct v4l2_mbus_framefmt *fmt;
> >>>> + int ret;
> >>>> +
> >>>> + dev_dbg(&client->dev, "%s for %d", __func__, format->pad);
> >>>> +
> >>>> + if (format->pad >= MIPID02_PAD_NB)
> >>>> + return -EINVAL;
> >>>> + /* second CSI-2 pad not yet supported */
> >>>> + if (format->pad == 1)
> >>>> + return -EINVAL;
> >>>> +
> >>>> + mutex_lock(&bridge->lock);
> >>>> +
> >>>> + if (bridge->streaming) {
> >>>> + ret = -EBUSY;
> >>>> + goto error;
> >>>> + }
> >>>> +
> >>>> + if (format->which == V4L2_SUBDEV_FORMAT_TRY)
> >>>> + fmt = v4l2_subdev_get_try_format(sd, cfg, format->pad);
> >>>> + else
> >>>> + fmt = &bridge->fmt;
> >>>> +
> >>>> + *fmt = *mbus_fmt;
> >>>
> >>> What are the limits of the hardware regarding the size of the image? Aren't
> >>> there any?
> >>>
> >> There are no limits for image size.
> >>> The format on the sink pad needs to be propagated to the source pad as
> >>> well. I presume there's nothing to set on the sink pad for this device, is
> >>> there?
> >> User only need to set format code so the driver can configure hardware.
> >> In the mipid02 we have always the same format for sink and source. So I
> >> only store one configuration during set_fmt when called from either pad0
> >> (sink) or pad2 (source). Is it the correct way to implement it ? or
> >> should I only accept set_fmt on pad0 ?
> >> For get_fmt I return stored configuration for pad0 and pad2.
> >
> > Only 76 or so characters per line, please.
> >
> > For pad 0 (sink) the format must be settable freely (as you don't have any
> > hardware restrictions) and on the pad 2 (source) the driver converts the
> > format set on the pad 0 according to the hardware functionality. This is
> > what the link validation from the source pad onwards is based on.
> >
> So for a set_fmt on pad 2 I return current configuration ? (as
> in my case I have the same configuration for pad 0 and pad2)
> And I only update format when set_fmt is called for pad 0 ?

Correct. Do note that the format is different in cases (uyvy8_1x16 vs. 2x8)
as you're dealing with two different kinds of busses.

--
Sakari Ailus
sakari.ailus@linux.intel.com

\
 
 \ /
  Last update: 2019-03-26 15:15    [W:0.099 / U:0.220 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site