lkml.org 
[lkml]   [2019]   [Apr]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v3 11/13] thermal: qoriq: Do not report invalid temperature reading
From
Date
On 01/04/2019 06:14, Andrey Smirnov wrote:
> Before returning measured temperature data to upper layer we need to
> make sure that the reading was marked as "valid" to avoid reporting
> bogus data.

Is it possible to add a comment above the read_poll to describe the
layout of the register ? That will help to understand the valid bit.

Is the valid bit reset after reading the value?

Other than that, Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>

> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
> Cc: Chris Healy <cphealy@gmail.com>
> Cc: Lucas Stach <l.stach@pengutronix.de>
> Cc: Zhang Rui <rui.zhang@intel.com>
> Cc: Eduardo Valentin <edubezval@gmail.com>
> Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
> Cc: Angus Ainslie (Purism) <angus@akkea.ca>
> Cc: linux-imx@nxp.com
> Cc: linux-pm@vger.kernel.org
> Cc: linux-kernel@vger.kernel.org
> ---
> drivers/thermal/qoriq_thermal.c | 13 +++++++++++--
> 1 file changed, 11 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/thermal/qoriq_thermal.c b/drivers/thermal/qoriq_thermal.c
> index 7ff93dfcd68b..9d227654f879 100644
> --- a/drivers/thermal/qoriq_thermal.c
> +++ b/drivers/thermal/qoriq_thermal.c
> @@ -37,6 +37,7 @@
> #define REGS_TRITSR(n) (0x100 + 16 * (n)) /* Immediate Temperature
> * Site Register
> */
> +#define TRITSR_V BIT(31)
> #define REGS_TTRnCR(n) (0xf10 + 4 * (n)) /* Temperature Range n
> * Control Register
> */
> @@ -62,10 +63,18 @@ static int tmu_get_temp(void *p, int *temp)
> struct qoriq_sensor *qsensor = p;
> struct qoriq_tmu_data *qdata = qoriq_sensor_to_data(qsensor);
> u32 val;
> + int ret;
>
> - regmap_read(qdata->regmap, REGS_TRITSR(qsensor->id), &val);
> - *temp = (val & 0xff) * 1000;
> + ret = regmap_read_poll_timeout(qdata->regmap,
> + REGS_TRITSR(qsensor->id),
> + val,
> + val & TRITSR_V,
> + USEC_PER_MSEC,
> + 10 * USEC_PER_MSEC);
> + if (ret)
> + return ret;
>
> + *temp = (val & 0xff) * 1000;
> return 0;
> }
>
>


--
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog

\
 
 \ /
  Last update: 2019-04-04 11:06    [W:0.285 / U:0.640 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site